How to remove the rear Crankshaft Seal on 2009 Toyota Sequoia?

Start the process of removing the rear crankshaft oil seal on a 2UZ-FE engine by removing the automatic transmission assembly regardless of whether the vehicle has 2WD or 4WD. The next step after automatic transmission assembly removal involves disassembling the drive plate and ring gear sub-assembly. Cut the oil seal lip using a knife and utilize a screwdriver to pry out the oil seal but protect both the oil seal press fit hole surface and crankshaft through the use of tape on the screwdriver tip.

OEM 2009 Toyota Sequoia Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2009 Toyota Sequoia Rear Main Seal
Part Number: 90311-A0002
$31.42 MSRP: $43.73
You Save: $12.31 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Timing Cover Seal; Rear Seal; Seal, Engine Rear Oil
- Manufacturer Note: (L)
- Part Name Code: 11381A
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.9 x 5.1 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Oil Seal, Front
Part Number: 90311-A0005
$19.11 MSRP: $26.60
You Save: $7.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Multi-Purpose Seal; Timing Cover Seal; Crankshaft Seal; Front Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 90311-42019, 90311-42007, 90311-42037, 90311-42036
- Part Name Code: 11301C
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.3 x 4.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Crankshaft Seal

Looking for affordable OEM 2009 Toyota Sequoia Crankshaft Seal? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Crankshaft Seal. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Crankshaft Seal Parts Q&A

Q: How to remove the rear Crankshaft Seal on 2009 Toyota Sequoia?
A: Start the process of removing the rear crankshaft oil seal on a 2UZ-FE engine by removing the automatic transmission assembly regardless of whether the vehicle has 2WD or 4WD. The next step after automatic transmission assembly removal involves disassembling the drive plate and ring gear sub-assembly. Cut the oil seal lip using a knife and utilize a screwdriver to pry out the oil seal but protect both the oil seal press fit hole surface and crankshaft through the use of tape on the screwdriver tip.