OEM 2009 Toyota Sequoia Brake Booster

2009 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to remove the Vacuum Brake Booster on 2009 Toyota Sequoia?

  A: The first step before seeking to remove the Vacuum Brake Booster involves draining the brake fluid then cleaning off any fluid which touches painted areas. The next step requires removal of the brake master cylinder sub-assembly. Start the vacuum hose assembly removal by sliding off the clip and unhinging the hose from the check valve. Cut off the two brake booster connectors from the brake booster system. Start your removal process with taking out the front door scuff plate on the left-hand side followed by the cowl side trim board on the left-hand side and concluding with removal of the instrument side panel on the left-hand side. You should remove the hood lock control lever sub-assembly in addition to the lower instrument panel finish panel sub-assembly LH. Safe pad insert from the number one location of the instrument panel and then remove the push rod's clip to detach it from its slot. The brake booster assembly should be removed by unthreading four nuts and pulling out the booster before stripping off the gasket and unlocking the lock nut and separating the clevis and then removing the brake vacuum check valve assembly.