How to install the front Brake Line on 2009 Toyota Sequoia?

Begin the front brake flexible hose installation by fixing the two new clips designated as A onto the hose. Using a union nut wrench (10 mm) connect the flexible hose to brake tube and wheel cylinder tube while applying a wrench on the flexible hose. When using a union nut wrench apply torque at 14 Nm while 15 Nm is the correct torque if using any other wrench. The application of torque requires a torque wrench with 300 mm (11.8 in.) fulcrum length so staff must maintain union nut wrench parallel to the torque wrench for accurate measurements. The procedure includes filling the reservoir with brake fluid followed by bleeding the air from the brake master cylinder then the brake line along with the VSC actuator assembly. Check both the brake fluid level and brake fluid leaks inside the reservoir before moving forward. Finally, install the front wheel.

OEM 2009 Toyota Sequoia Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2009 Toyota Sequoia Flex Hose, Front
Part Number: 90947-A2016
$45.74 MSRP: $63.67
You Save: $17.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2016
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Flex Hose, Driver Side
Part Number: 47340-0C010
$106.89 MSRP: $150.04
You Save: $43.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube); Hydraulic Hose
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 47316A
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47340-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Flex Hose, Passenger Side
Part Number: 47330-0C010
$106.89 MSRP: $150.04
You Save: $43.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube); Hydraulic Hose
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 47316A
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47330-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Sequoia Brake Line

Looking for affordable OEM 2009 Toyota Sequoia Brake Line? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the front Brake Line on 2009 Toyota Sequoia?
A: Begin the front brake flexible hose installation by fixing the two new clips designated as A onto the hose. Using a union nut wrench (10 mm) connect the flexible hose to brake tube and wheel cylinder tube while applying a wrench on the flexible hose. When using a union nut wrench apply torque at 14 Nm while 15 Nm is the correct torque if using any other wrench. The application of torque requires a torque wrench with 300 mm (11.8 in.) fulcrum length so staff must maintain union nut wrench parallel to the torque wrench for accurate measurements. The procedure includes filling the reservoir with brake fluid followed by bleeding the air from the brake master cylinder then the brake line along with the VSC actuator assembly. Check both the brake fluid level and brake fluid leaks inside the reservoir before moving forward. Finally, install the front wheel.