How to replace the Brake Line for the front flexible hose on 2008 Toyota Sequoia?

You should start hose installation by adding two clips (identified as A) to the flexible hose. Start by attaching the flexible hose to brake tube and wheel cylinder tube through the use of a union nut wrench while holding the hose with this tool. The correct torque value for connecting a front flexible hose with a union nut wrench should be 14 Nm (144 kgf-cm, 10 ft-lbf) while a regular wrench requires 15 Nm (155 kgf-cm, 11 ft-lbf). The torque required for these components can be reached by a 300 mm (11.8 in.) torque wrench along with a 22 mm (0.866 in.) union nut wrench which needs to remain parallel to the torque wrench in position. The technician should start by filling the brake fluid reservoir followed by bleeding air from the brake master cylinder then moving to bleed air from the brake line and finally bleaching from the VSC actuator assembly. The last step requires checking brake fluid levels within the reservoir as well as inspecting for fluid leaks. Finally, install the front wheel.

OEM 2008 Toyota Sequoia Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2008 Toyota Sequoia Flex Hose, Front
Part Number: 90947-A2016
$45.74 MSRP: $63.67
You Save: $17.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2016
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Flex Hose, Driver Side
Part Number: 47340-0C010
$106.89 MSRP: $150.04
You Save: $43.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube); Hydraulic Hose
- Manufacturer Note: LH
- Position: Driver Side
- Part Name Code: 47316A
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47340-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Flex Hose, Passenger Side
Part Number: 47330-0C010
$106.89 MSRP: $150.04
You Save: $43.15 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube); Hydraulic Hose
- Manufacturer Note: RH
- Position: Passenger Side
- Part Name Code: 47316A
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.3 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47330-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Brake Line

Looking for affordable OEM 2008 Toyota Sequoia Brake Line? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

Q: How to replace the Brake Line for the front flexible hose on 2008 Toyota Sequoia?
A: You should start hose installation by adding two clips (identified as A) to the flexible hose. Start by attaching the flexible hose to brake tube and wheel cylinder tube through the use of a union nut wrench while holding the hose with this tool. The correct torque value for connecting a front flexible hose with a union nut wrench should be 14 Nm (144 kgf-cm, 10 ft-lbf) while a regular wrench requires 15 Nm (155 kgf-cm, 11 ft-lbf). The torque required for these components can be reached by a 300 mm (11.8 in.) torque wrench along with a 22 mm (0.866 in.) union nut wrench which needs to remain parallel to the torque wrench in position. The technician should start by filling the brake fluid reservoir followed by bleeding air from the brake master cylinder then moving to bleed air from the brake line and finally bleaching from the VSC actuator assembly. The last step requires checking brake fluid levels within the reservoir as well as inspecting for fluid leaks. Finally, install the front wheel.