OEM 2008 Toyota Sequoia Brake Booster

2008 Toyota Sequoia Parts Questions & Experts Answers

• Q: How to remove the Vacuum Brake Booster on 2008 Toyota Sequoia?

  A: The first step to remove the Vacuum Brake Booster includes draining brake fluid followed by cleaning any fluid that touches painted areas with a cloth. The next procedure involves taking away the Brake Master Cylinder Sub-Assembly. Unplug the vacuum hose assembly through the process of moving the clip and detaching the hose from the check valve. Unplug the two connectors from the brake booster itself. The service process begins by removing the Front Door Scuff Plate LH together with the Cowl Side Trim Board LH and Instrument Side Panel LH and Hood Lock Control Lever Sub-Assembly and Lower Instrument Panel Finish Panel Sub-Assembly LH. Take out the No. 1 Instrument Panel Safety Pad Insert after all other mentioned steps. Dissolve the push rod pin by pulling off the clip and its attached pin. The Brake Booster Assembly must be removed by disassembling the four nuts which allows pulling out the booster before removing the gasket and loosening the lock nut to release the clevis. The evaluation ends by taking out the Brake Vacuum Check Valve Assembly.