Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Right; Suspension Control Arm, Rear Right; Arm Assembly, Trailing, Rear Passenger Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
Manufacturer Note: RH
Position: Rear Passenger Side
Item Weight: 1.10 Pounds
Item Dimensions: 2.4 x 2.0 x 2.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48760-42010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Arm Assembly, Trailing; Suspension Trailing Arm, Rear Left; Suspension Control Arm, Rear Left; Arm Assembly, Trailing, Rear Driver Side; Arm Assembly, Trailing, Rear; Suspension Trailing Arm
Manufacturer Note: LH
Position: Rear Driver Side
Item Weight: 0.80 Pounds
Item Dimensions: 2.1 x 1.8 x 2.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48780-42010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
2009 Toyota RAV4 Trailing Arm
Looking for affordable OEM 2009 Toyota RAV4 Trailing Arm? Explore our comprehensive catalogue of genuine 2009 Toyota RAV4 Trailing Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota RAV4 Parts Questions & Experts Answers
Q: How to remove the rear trailing arm on 2009 Toyota RAV4?
A: Inspection of the rear trailing arm starts by taking off the rear wheel. The second step requires disconnecting the No. 2 parking brake cable assembly. Start by disconnecting the No. 2 parking brake cable assembly. Afterward, remove the rear trailing arm assembly on the left-hand side by removing 3 bolts and the nut which secures the trailing arm to the axle carrier and suspension arm bracket. During this process you must hold the nut until after the bolt is loosened. Apply the right-hand side procedures.