How to remove the parking brake cable for the Torsion Beam Type Suspension on 2009 Toyota Matrix?

Starting the cable replacement of the Torsion Beam Type Suspension requires disconnecting the cable from the negative battery terminal and waiting at least 90 seconds to disable the SRS system. Maintenance begins with the removal of front assemblies for each side before disassembling the front console box. The service procedure starts by removing the No. 2 and No. 3 belt anchor reinforcement sub-assemblies and separating the parking brake equalizer before taking out the parking brake lever assembly and parking brake equalizer. You should begin by taking away the parking brake cable end stopper then the No. 1 parking brake cable assembly. Begin removing the rear wheel before proceeding to take out the front exhaust pipe assembly for 2ZR-FE models and the center exhaust pipe assembly for 2AZ-FE vehicles. Then extract both upper No. 1 and No. 2 front floor heat insulators and the No. 1 fuel tank protector. The operator needs to first remove the parking brake lever protector from the No. 3 parking brake cable assembly before opening its clamp with a bolt to detach this assembly from the rear disc brake cylinder assembly. You can remove the No. 3 parking brake cable assembly by disconnecting a clip at its 14 mm base with an offset wrench and pulling it forward. As the final step separate the No. 3 parking brake cable clamp by unfastening its 2 claws.

OEM 2009 Toyota Matrix Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Parking Brake Cables found

View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46430-02181
$79.86 MSRP: $112.09
You Save: $32.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-02180
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-02181
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- S | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46420-02181
$77.13 MSRP: $108.26
You Save: $31.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-02180
- Part Name Code: 46420
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-02181
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- S | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46420-02151
$75.47 MSRP: $105.94
You Save: $30.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: MEXICO SPEC
- Replaces: 46420-02150
- Part Name Code: 46420
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-02151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46430-02151
$75.47 MSRP: $105.94
You Save: $30.47 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: MEXICO SPEC
- Replaces: 46430-02150
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-02151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- Base | 4 Cyl 1.8 L GAS
View related parts
2009 Toyota Matrix Front Cable
Part Number: 46410-02110
$28.55 MSRP: $39.74
You Save: $11.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 16.0 x 11.7 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-02110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- S | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Front Cable
Part Number: 46410-02100
$27.95 MSRP: $38.90
You Save: $10.95 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46410
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.4 x 11.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46410-02100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- Base, S, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46430-02160
$77.13 MSRP: $108.26
You Save: $31.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.20 Pounds
- Item Dimensions: 17.9 x 13.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-02160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- XRS | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46420-02160
$77.13 MSRP: $108.26
You Save: $31.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.60 Pounds
- Item Dimensions: 16.8 x 12.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-02160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- XRS | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46420-02170
$77.13 MSRP: $108.26
You Save: $31.13 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46420
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.3 x 12.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46420-02170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- S | 4 Cyl 2.4 L GAS
View related parts
2009 Toyota Matrix Rear Cable
Part Number: 46430-02170
$75.47 MSRP: $105.94
You Save: $30.47 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Part Name Code: 46430
- Item Weight: 2.40 Pounds
- Item Dimensions: 18.1 x 13.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 46430-02170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Matrix Submodels:
- S | 4 Cyl 2.4 L GAS

2009 Toyota Matrix Parking Brake Cable

Looking for affordable OEM 2009 Toyota Matrix Parking Brake Cable? Explore our comprehensive catalogue of genuine 2009 Toyota Matrix Parking Brake Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Matrix Parking Brake Cable Parts Q&A

Q: How to remove the parking brake cable for the Torsion Beam Type Suspension on 2009 Toyota Matrix?
A: Starting the cable replacement of the Torsion Beam Type Suspension requires disconnecting the cable from the negative battery terminal and waiting at least 90 seconds to disable the SRS system. Maintenance begins with the removal of front assemblies for each side before disassembling the front console box. The service procedure starts by removing the No. 2 and No. 3 belt anchor reinforcement sub-assemblies and separating the parking brake equalizer before taking out the parking brake lever assembly and parking brake equalizer. You should begin by taking away the parking brake cable end stopper then the No. 1 parking brake cable assembly. Begin removing the rear wheel before proceeding to take out the front exhaust pipe assembly for 2ZR-FE models and the center exhaust pipe assembly for 2AZ-FE vehicles. Then extract both upper No. 1 and No. 2 front floor heat insulators and the No. 1 fuel tank protector. The operator needs to first remove the parking brake lever protector from the No. 3 parking brake cable assembly before opening its clamp with a bolt to detach this assembly from the rear disc brake cylinder assembly. You can remove the No. 3 parking brake cable assembly by disconnecting a clip at its 14 mm base with an offset wrench and pulling it forward. As the final step separate the No. 3 parking brake cable clamp by unfastening its 2 claws.

Alternate Year Models

2008 Toyota Matrix Parking Brake Cable 2010 Toyota Matrix Parking Brake Cable