Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
Manufacturer Note: KOREA SPEC
Position: Rear
Replaces: 69350-28150
Part Name Code: 69350P
Item Weight: 1.90 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 69350-28151
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock
Position: Rear
Replaces: 69350-28160
Item Weight: 2.40 Pounds
Condition: New
SKU: 69350-28161
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
2009 Toyota Highlander Trunk Lid Latch
Looking for affordable OEM 2009 Toyota Highlander Trunk Lid Latch? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Trunk Lid Latch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Highlander Parts Questions & Experts Answers
Q: How to service and repair the Trunk Lid Latch on 2009 Toyota Highlander?
A: The trunk/liftgate lock repair procedure starts with taking protective measures for wiper and washer systems. The back door trim cover on the left side should be removed after the panel assembly of the back window upper trim or the back door service hole cover if the vehicle has the power back door system. First disconnect the power back door rod when it exists and afterward remove the left back door trim cover for vehicles with a power back door system along with the right back door trim cover. Begin by taking off the back door lock cover which applies to glass hatch types and the assist strap hole cover followed by the assist strap assembly. The servicing engineer should remove back door trim panel assembly along with rear wiper shaft cover followed by removing the rear wiper arm head cap until the rear wiper arm and blade assembly and rear wiper link cap are accessible before finally separating the rear wiper link pivot and rear wiper motor assembly. The process to remove the back window lock assembly requires the connector detachment and clamp release followed by bolt removal of 3 parts then clip disengagement and final assembly deletion.