How to remove the Trunk Lid Latch assembly on 2008 Toyota Highlander?

The first step to remove the back door lock assembly requires the removal of the back window upper panel trim assembly. The left-hand side back door trim cover must be removed from non-power door vehicles whereas those with power doors need both the left-side back door service hole cover removed along with power back door rod disconnection. Vehicles that use a power back door need users to eliminate the left-hand side back door trim cover and the right-hand side back door trim cover in succession. The procedure begins by removing the back door lock cover if the hatch is glass until the assist strap hole cover and assist strap assembly can be unplugged. Next in the order move the back door trim panel assembly. Remove the three bolts and separate the back door lock assembly when working on vehicles without power back doors functionality. The assembly removal process for power back door vehicles requires connector detaching and clamp release as well as four bolt removal from the back door lock assembly.

OEM 2008 Toyota Highlander Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Lid Latches found

View related parts
2008 Toyota Highlander Gate Lock, Rear
Part Number: 69350-28151
$174.01 MSRP: $246.33
You Save: $72.32 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock; Lock Assembly, Back Door, W/Courtesy Lamp Switch
- Manufacturer Note: KOREA SPEC
- Position: Rear
- Replaces: 69350-28150
- Part Name Code: 69350P
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69350-28151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Gate Lock, Rear
Part Number: 69350-28161
$205.03 MSRP: $292.73
You Save: $87.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Back Door; Liftgate Latch; Tailgate Lock Actuator; Trunk Lock Actuator; Door Lock Actuator; Lock Actuator; Lock Assembly; Lock
- Position: Rear
- Replaces: 69350-28160
- Item Weight: 2.40 Pounds
- Condition: New
- SKU: 69350-28161
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2008 Toyota Highlander Trunk Lid Latch

Looking for affordable OEM 2008 Toyota Highlander Trunk Lid Latch? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Trunk Lid Latch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to remove the Trunk Lid Latch assembly on 2008 Toyota Highlander?
A: The first step to remove the back door lock assembly requires the removal of the back window upper panel trim assembly. The left-hand side back door trim cover must be removed from non-power door vehicles whereas those with power doors need both the left-side back door service hole cover removed along with power back door rod disconnection. Vehicles that use a power back door need users to eliminate the left-hand side back door trim cover and the right-hand side back door trim cover in succession. The procedure begins by removing the back door lock cover if the hatch is glass until the assist strap hole cover and assist strap assembly can be unplugged. Next in the order move the back door trim panel assembly. Remove the three bolts and separate the back door lock assembly when working on vehicles without power back doors functionality. The assembly removal process for power back door vehicles requires connector detaching and clamp release as well as four bolt removal from the back door lock assembly.