Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Toyota Highlander Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2009 Toyota Highlander Steering Knuckle - 43211-0E010
    2009 Toyota Highlander Steering Knuckle Diagram - 43211-0E010
    View related parts

    2009 Toyota Highlander Knuckle, Steering, Passenger Side

    Part Number: 43211-0E010
    $332.71 MSRP: $475.04
    You Save: $142.33 (30%)
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering, Right; Knuckle
    • Manufacturer Note: CANADA SPEC
    • Position: Passenger Side
    • Replaces: 43211-48010
    • Part Name Code: 43211
    • Item Weight: 11.60 Pounds
    • Item Dimensions: 17.7 x 11.3 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43211-0E010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Highlander Submodels:
    • Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
  • 2009 Toyota Highlander Steering Knuckle - 43212-0E010
    2009 Toyota Highlander Steering Knuckle Diagram - 43212-0E010
    View related parts

    2009 Toyota Highlander Knuckle, Steering, Driver Side

    Part Number: 43212-0E010
    $341.17 MSRP: $499.98
    You Save: $158.81 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering, Left; Knuckle
    • Position: Driver Side
    • Replaces: 43212-48010
    • Part Name Code: 43212
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 17.3 x 11.1 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 43212-0E010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Highlander Submodels:
    • Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, Plus, SE, Sport, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS

2009 Toyota Highlander Steering Knuckle

Looking for affordable OEM 2009 Toyota Highlander Steering Knuckle? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Steering Knuckle. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Parts Questions & Experts Answers

  • Q: How to install the steering knuckle on 2009 Toyota Highlander?
    A: Special Service Tools 09950-60020 and 09951-00810 enable you to install a new front axle hub bearing into the steering knuckle when assisted by a press. These installation steps consist of front disc brake dust cover followed by the front axle hub sub-assembly and front axle hub hole snap ring and then the No. 1 front wheel bearing dust deflector. First install the front lower ball joint and front axle assembly and front drive shaft assembly and then complete the installation with the front lower suspension arm. The tie rod assembly connection requires attention for both 1AR-FE and 2GR-FE engine types. You must first install the front disc brake dust cover after the front disc brake caliper assembly and the front axle hub nut. To continue remove the front disc brake caliper assembly for separation of its components including the front disc. Inspect the front axle hub bearing loosens the equipment and checks its runout before reinstalling the front disc and front disc brake caliper assembly and the front speed sensor. Obtain the front axle hub nut stake for front wheel installation that requires 103 Nm (1050 kgf-cm, 76 ft-lbf) torque. Both front wheel alignment adjustment and speed sensor signal testing should be performed during the final inspection.

Related 2009 Toyota Highlander Parts

Alternate Year Models

+
2008 Toyota Highlander Steering Knuckle 2010 Toyota Highlander Steering Knuckle