How to install the front exhaust pipe assembly on 2009 Toyota Highlander?

A vernier caliper measurement of the compression springs' free length should precede front exhaust pipe assembly installation because the spring must be replaced if its measurement falls below 41.5 mm (1.64 in.). Use a plastic hammer with wooden block to flatten the new gasket entering the exhaust manifold assembly while aligning it correctly in its direction and preventing reuse or damage. Use of the exhaust pipe to push in the gasket is forbidden during the connection process. The front exhaust pipe requires installation with two bolts and two compression springs. Use torque settings of 48 Nm (489 kgf-cm, 35 ft-lbf). Next, install the oxygen sensor. Use a new gasket to connect the front exhaust pipe assembly to its 4 exhaust pipe supports before torquing the 2 bolts to 56 Nm (571 kgf-cm, 41 ft-lbf). Fasten the exhaust pipe damper onto the center exhaust pipe assembly with 19 Nm torque (194 kgf-cm, 14 ft-lbf). The compression spring in the tail exhaust pipe assembly must be replaced if its free length measures below 40.5 mm (1.60 in.). New gaskets should be inserted fully into the center exhaust pipe assembly before tapping it to achieve flush mounting without any reuse or damage to the parts. Fasten the tail exhaust pipe assembly to the exhaust pipe support by using two bolts and two compression springs while tightening them to 48 Nm (489 kgf-cm, 35 ft-lbf). Exhaust gas leaks must be checked as the final step.

OEM 2009 Toyota Highlander Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Exhaust Pipes found

View related parts
2009 Toyota Highlander Muffler & Pipe, Center
Part Number: 17420-0P150
$1594.18 MSRP: $2139.85
You Save: $545.67 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Replaces: 17420-31180
- Part Name Code: 17420
- Item Weight: 16.40 Pounds
- Item Dimensions: 51.4 x 19.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-0P150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Pipe Sub-Assembly, Exhaust, Front
Part Number: 17403-0P100
$128.79 MSRP: $166.99
You Save: $38.20 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Exhaust System; Exhaust Y Pipe; Exhaust Pipe
- Replaces: 17403-20170
- Part Name Code: 17403
- Item Weight: 5.10 Pounds
- Item Dimensions: 71.5 x 23.3 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17403-0P100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, Plus, SE, Sport | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Front Pipe
Part Number: 17410-0P180
$261.39 MSRP: $341.83
You Save: $80.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Front Shield; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-31660
- Part Name Code: 17410
- Item Weight: 8.10 Pounds
- Item Dimensions: 48.6 x 18.7 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, SE, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Tail Pipe
Part Number: 17430-0V070
$225.09 MSRP: $294.36
You Save: $69.27 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Rear Muffler; Pipe Assembly, Exhaust, Tail; Muffler
- Replaces: 17430-36090
- Part Name Code: 17430
- Item Weight: 10.70 Pounds
- Item Dimensions: 42.8 x 12.8 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0V070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Front Pipe
Part Number: 17410-20510
$260.35 MSRP: $340.47
You Save: $80.12 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 10.90 Pounds
- Item Dimensions: 47.2 x 18.2 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-20510
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Intermediate Pipe
Part Number: 17403-20190
$228.77 MSRP: $299.17
You Save: $70.40 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Sub-Assembly, Exhaust; Intermediate Pipe, Center; Exhaust System; Y Pipe; Connector Pipe; Extension; Pipe Sub-Assembly, Exhaust, Front
- Part Name Code: 17403
- Item Weight: 15.10 Pounds
- Item Dimensions: 70.1 x 22.2 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17403-20190
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Tail Pipe
Part Number: 17430-31580
$225.09 MSRP: $294.36
You Save: $69.27 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Rear Muffler; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 10.90 Pounds
- Item Dimensions: 44.9 x 12.2 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-31580
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited, SE, Sport | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Muffler & Pipe, Center
Part Number: 17420-20420
$1714.17 MSRP: $2300.91
You Save: $586.74 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Muffler; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.30 Pounds
- Item Dimensions: 51.9 x 20.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-20420
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Toyota Highlander Muffler & Pipe, Center
Part Number: 17420-36040
$1643.84 MSRP: $2206.51
You Save: $562.67 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Exhaust Pipe; Tail Pipe; Muffler; Pipe Assembly, Exhaust, Center
- Position: Center
- Part Name Code: 17420
- Item Weight: 16.40 Pounds
- Item Dimensions: 51.9 x 19.8 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17420-36040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Highlander Front Pipe
Part Number: 17410-36130
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Part Name Code: 17410
- Item Weight: 11.40 Pounds
- Item Dimensions: 48.6 x 17.7 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-36130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base | 4 Cyl 2.7 L GAS

2009 Toyota Highlander Exhaust Pipe

Looking for affordable OEM 2009 Toyota Highlander Exhaust Pipe? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the front exhaust pipe assembly on 2009 Toyota Highlander?
A: A vernier caliper measurement of the compression springs' free length should precede front exhaust pipe assembly installation because the spring must be replaced if its measurement falls below 41.5 mm (1.64 in.). Use a plastic hammer with wooden block to flatten the new gasket entering the exhaust manifold assembly while aligning it correctly in its direction and preventing reuse or damage. Use of the exhaust pipe to push in the gasket is forbidden during the connection process. The front exhaust pipe requires installation with two bolts and two compression springs. Use torque settings of 48 Nm (489 kgf-cm, 35 ft-lbf). Next, install the oxygen sensor. Use a new gasket to connect the front exhaust pipe assembly to its 4 exhaust pipe supports before torquing the 2 bolts to 56 Nm (571 kgf-cm, 41 ft-lbf). Fasten the exhaust pipe damper onto the center exhaust pipe assembly with 19 Nm torque (194 kgf-cm, 14 ft-lbf). The compression spring in the tail exhaust pipe assembly must be replaced if its free length measures below 40.5 mm (1.60 in.). New gaskets should be inserted fully into the center exhaust pipe assembly before tapping it to achieve flush mounting without any reuse or damage to the parts. Fasten the tail exhaust pipe assembly to the exhaust pipe support by using two bolts and two compression springs while tightening them to 48 Nm (489 kgf-cm, 35 ft-lbf). Exhaust gas leaks must be checked as the final step.

Related 2009 Toyota Highlander Parts

Alternate Year Models

2008 Toyota Highlander Exhaust Pipe 2010 Toyota Highlander Exhaust Pipe