×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2009 Toyota Corolla Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wiper Motors found
2009 Toyota Corolla Front Motor
Part Number: 85110-02270$175.18 MSRP: $247.99You Save: $72.81 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Motor; Motor Assembly, Windshield Wiper; Wiper Motor
- Position: Front
- Part Name Code: 85110
- Item Weight: 2.80 Pounds
- Item Dimensions: 7.7 x 5.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85110-02270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Corolla Motor, Front
Part Number: 85110-12A20$188.49 MSRP: $269.12You Save: $80.63 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Motor Assembly, Front Wiper; Wiper Motor; Motor Assembly, Windshield Wiper
- Position: Front
- Part Name Code: 85110
- Item Weight: 2.90 Pounds
- Item Dimensions: 10.1 x 6.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85110-12A20
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2009 Toyota Corolla Wiper Motor
Looking for affordable OEM 2009 Toyota Corolla Wiper Motor? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Wiper Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Corolla Wiper Motor Parts Q&A
- Q: How to install the windshield wiper motor assembly and related components on 2009 Toyota Corolla?A: The windshield wiper motor assembly installation requires bolt attachment with 5.4 Nm torque (55 kgf-cm, 48 in-lbf) and connector connection with new electrical tape applied to the wire harness where it was detached to provide secure board attachment. Use MP grease for applying to the crank arm pivot of the windshield wiper motor assembly then link the rod of the windshield wiper link assembly to this pivot point. Fasten the windshield wiper motor and link assembly using two bolts that should be torqued to 5.5 Nm (56 kgf-cm, 49 in-lbf) while connecting the connector. Personnel should engage the clip with eight claws for installing the cowl top ventilator louver LH and the clip with fourteen claws for the center No. 1 cowl top ventilator louver. Begin the installation of cowl top seal by attaching its seven clips. The installation of the front wiper arm and blade assembly RH requires operation of the wiper control to bring the windshield wiper motor to stop at the automatic position when the vehicle will be cleaned with a wire brush then the assembly will be installed with the nut torqued to 26 Nm (265 kgf-cm, 19 ft-lbf) while the installer holds the arm hinge to fasten the nut. Spray washer fluid on the windshield to validate the front wipers do not touch any vehicle body while testing the LH front arm and blade assembly through the same installation process. Process by installing the 2 front wiper arm head caps as the last step.