Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
Replaces: 85720-35140
Item Weight: 1.30 Pounds
Item Dimensions: 7.4 x 4.6 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85720-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
Replaces: 85710-35180
Item Weight: 1.30 Pounds
Item Dimensions: 7.7 x 4.7 x 4.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 85710-AE010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Corolla Submodels:
50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
2009 Toyota Corolla Window Motor
Looking for affordable OEM 2009 Toyota Corolla Window Motor? Explore our comprehensive catalogue of genuine 2009 Toyota Corolla Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Corolla Parts Questions & Experts Answers
Q: How to remove the rear door window regulator motor on 2009 Toyota Corolla?
A: The first step for removing the rear door window regulator motor requires disconnecting the negative battery cable. The removal process starts with disassembling the rear door inside handle bezel combined with rear door armrest upper base panel and followed by rear door trim board sub-assembly and rear door inside handle sub-assembly. The field of work starts with removal of the rear door inner glass Weather Strip and proceeds with taking out the rear door trim bracket and the rear door service hole cover. Begin by cutting off the top part of the rear door Weather Strip until enough access is available and then take out the rear door glass run. Proceed by taking out the rear door window division bar sub-assembly followed by rear door quarter window glass and rear door glass sub-assembly. The installation of the rear power window regulator motor assembly and the rear door window regulator sub-assembly happens at the last stage of the process.