How to install the rear spoiler on 2009 Toyota 4Runner?

Install the rear spoiler by striking waterproof rivets of diameter 4 mm through an air or hand riveter with a nose piece into the body panel to secure the 2 rear spoiler clips No. 1 on the back door panel. Position the rivets perpendicular to prevent mandrel bending during installation. Use two bolts to mount the center stop light assembly by torquing them to 2.5 Nm (25 kgf-cm, 22 in-lbf). Connect the center stop light connector followed by installing the spoiler through 2 bolts attached to 2 grommets while tightening them to 7.0 Nm (71 kgf-cm, 62 in-lbf).

OEM 2009 Toyota 4Runner Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spoiler found

View related parts
2009 Toyota 4Runner Spoiler Assembly, Rear
Part Number: 76085-35904
Product Specifications
- Other Name: Spoiler Sub-Assembly, Rear; Spoiler, Rear
- Position: Rear
- Replaces: 76085-35070-E0, 76085-35070-F0, 76085-35070-J0, 76085-35070-J1, 76085-35070-B2, 76085-35070-J2, 76085-35070-A1, 76085-35070-B1, 76085-35050-C0, 76085-35050-A1, 76085-35070-J3
- Condition: New
- SKU: 76085-35904
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following 2009 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2009 Toyota 4Runner Spoiler

Looking for affordable OEM 2009 Toyota 4Runner Spoiler? Explore our comprehensive catalogue of genuine 2009 Toyota 4Runner Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota 4Runner Spoiler Parts Questions & Experts Answers

Q: How to install the rear spoiler on 2009 Toyota 4Runner?
A: Install the rear spoiler by striking waterproof rivets of diameter 4 mm through an air or hand riveter with a nose piece into the body panel to secure the 2 rear spoiler clips No. 1 on the back door panel. Position the rivets perpendicular to prevent mandrel bending during installation. Use two bolts to mount the center stop light assembly by torquing them to 2.5 Nm (25 kgf-cm, 22 in-lbf). Connect the center stop light connector followed by installing the spoiler through 2 bolts attached to 2 grommets while tightening them to 7.0 Nm (71 kgf-cm, 62 in-lbf).