How to install the windshield wiper motor assembly on 2009 Toyota 4Runner?

Question

Accepted Answer

The windscreen wiper motor assembly needs MP grease on its clank arm pivot before attaching it with 2 bolts at 7.5 Nm torque (76 kgf-cm, 66 in-lbf). The next step involves installing the rubber pin meshing before you bolt the windshield wiper link assembly with 2 bolts that require 7 Nm torque (71 kgf-cm or 62 in-lbf). Lastly, hook up the required connector. You must clean the serration parts of the wiper arms using a round file before applying a wire brush to the wiper pivot serration after stopping the automatic wiper at its programmed position. Fasten the front wiper arm LH by installing a nut and torqueing it to 25 Nm (255 kgf-cm, 18.4 ft-lbf) while keeping the hand on the arm hinge to secure the nut. Put the front wiper arm RH through the same scraping and cleaning process before installing it with a nut at its specified position and torquing it to 25 Nm (255 kgf-cm, 18.4 ft-lbf), while maintaining pressure on the arm hinge to fasten the nut. The wiper function should be tested with running water or washer fluid on the window while operating the wiper to ensure smooth wiping and avoid rear wiper contact with vehicle body.

OEM 2009 Toyota 4Runner Wiper Motor

3 Wiper Motors found

2009 Toyota 4Runner Motor Assembly, Rear

2009 Toyota 4Runner Wiper Motor, Front

2009 Toyota 4Runner Wiper Motor, Front

2009 Toyota 4Runner Wiper Motor

2009 Toyota 4Runner Wiper Motor Parts Q&A

Related 2009 Toyota 4Runner Parts

Alternate Year Models