How to remove the front wiper motor on 2008 Toyota 4Runner?

A small screwdriver should be used to remove the front wiper arm head caps followed by taping the screwdriver tip as protection. Start by requesting that the wiper operation stops at the automatic position before removing the right-hand front wiper arm nuts and front wiper arms followed by left-hand front wiper arm nuts and front wiper arms. First remove the clip then release the 2 claws that allow removal of the front fender to cowl side seal on the left side followed by tending to the right side. Use the clip remover to disengage the meshing of 6 clips and remove 9 claws before taking off the cowl top ventilator louver sub-assembly after unfastening the 2 clips. To remove the windshield wiper motor and link you must disconnect it then remove its 2 bolts before sliding the wiper link assembly towards the vehicle passenger side while letting the rubber pin become unmeshed. You must use a screwdriver to disengage the meshing of 2 rods located at the clank arm pivot of the windshield wiper motor assembly before removing the 2 bolts to extract this assembly.

OEM 2008 Toyota 4Runner Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2008 Toyota 4Runner Motor Assembly, Rear
Part Number: 85130-35080
$220.17 MSRP: $314.36
You Save: $94.19 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Rear Wiper; Back Glass Wiper Motor; Rear Motor; Wiper Motor
- Position: Rear
- Part Name Code: 85110R
- Item Weight: 2.90 Pounds
- Item Dimensions: 11.3 x 6.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85130-35080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Wiper Motor, Front
Part Number: 85110-47080
$220.29 MSRP: $314.52
You Save: $94.23 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor
- Position: Front
- Replaces: 85110-35300
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.0 x 6.3 x 4.8 inches
- Condition: New
- SKU: 85110-47080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2008 Toyota 4Runner Wiper Motor, Front
Part Number: 85110-1A040
$207.82 MSRP: $296.73
You Save: $88.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Front Wiper; Windshield Wiper Motor; Front Motor
- Position: Front
- Replaces: 85110-35290
- Item Weight: 3.30 Pounds
- Condition: New
- SKU: 85110-1A040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Wiper Motor

Looking for affordable OEM 2008 Toyota 4Runner Wiper Motor? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Wiper Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Wiper Motor Parts Q&A

Q: How to remove the front wiper motor on 2008 Toyota 4Runner?
A: A small screwdriver should be used to remove the front wiper arm head caps followed by taping the screwdriver tip as protection. Start by requesting that the wiper operation stops at the automatic position before removing the right-hand front wiper arm nuts and front wiper arms followed by left-hand front wiper arm nuts and front wiper arms. First remove the clip then release the 2 claws that allow removal of the front fender to cowl side seal on the left side followed by tending to the right side. Use the clip remover to disengage the meshing of 6 clips and remove 9 claws before taking off the cowl top ventilator louver sub-assembly after unfastening the 2 clips. To remove the windshield wiper motor and link you must disconnect it then remove its 2 bolts before sliding the wiper link assembly towards the vehicle passenger side while letting the rubber pin become unmeshed. You must use a screwdriver to disengage the meshing of 2 rods located at the clank arm pivot of the windshield wiper motor assembly before removing the 2 bolts to extract this assembly.