Toyota 76085-35904
Spoiler Assembly, Rear

The rear spoiler removal requires users to uninstall the 2 grommets together with 2 bolts before separating the center stop light connector. The next step involves extracting the center stop light assembly through unfastening the two associated bolts. A drill tip with dia 4 mm (0.16 in.) or less should be used for splitting rear spoiler clip No. 1 with a 5 mm (0.20 in.) taped drill tip to avoid drilling too deeply. The drill tip should be positioned vertically and carefully onto the rivet before cutting the flanges to extract the rivet. Excessive drilling pressure risks making the rivet turn with the drill tool thus blocking a proper cut while drilling actions on rivet holes might harm both components. Proceed with caution because the cut rivet will be hot to the touch. The last action involves removing both spoiler clips from the back door panel.

Install the spoiler with 2 bolts and 2 grommets, applying a torque of 7.0 Nm (71 kgf-cm, 62 in-lbf).

An air riveter or hand riveter with a nose piece.

The cut rivet will be hot.

Reinstall the center stop lamp assembly with the 2 bolts, torquing to 2.5 N.m (25 kgf.cm, 22 in.lbf).

Remove the 2 spoiler clips from the back door panel.