Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right Outer; Outer Belt Assembly; Belt Assembly, Rear Seat, Outer Passenger Side
Manufacturer Note: BLACK,TRIM1#
Position: Outer Passenger Side
Part Name Code: 73360C
Item Weight: 2.90 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73360-52250-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left Outer; Outer Belt Assembly; Belt Assembly, Rear Seat, Outer Driver Side
Manufacturer Note: BLACK,TRIM1#
Position: Outer Driver Side
Part Name Code: 73370C
Item Weight: 2.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 73370-52210-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Belt Assembly, Rear Seat 3; Seat Belt Lap and Shoulder Belt, Rear Inner; Center Seat Belt; Belt Assembly, Rear Seat 3 Point Type, Passenger Side
Manufacturer Note: BLACK,TRIM1#
Position: Passenger Side
Part Name Code: 73310
Condition: New
Fitment Type: Direct Replacement
SKU: 73310-52040-B0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Scion xD Submodels:
Base | 4 Cyl 1.8 L GAS
2009 Scion xD Seat Belt
Looking for affordable OEM 2009 Scion xD Seat Belt? Explore our comprehensive catalogue of genuine 2009 Scion xD Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Scion xD Seat Belt Parts Q&A
Q: How to Remove the Front Seat Inner Seat Belt Assembly on 2009 Scion xD?
A: A proper start for front seat inner belt assembly removal requires disconnecting the negative battery cable terminal. The front seat requires a "TORX" socket wrench E10 when you are performing removal tasks. The given instructions work equally for driver seats and front passenger seats. Start the operation by taking off the front seat assembly from the left-hand side then move to the right-hand side. Begin by disconnecting the seat position sensor connector and removing the buckle switch connector along with taking out the two wiring harness clamps. After detaching the wiring harness from its claw on the front seat cushion shield remove the bolt and the front seat inner belt. The right-hand side disassembly begins by uninstalling the buckle switch connector and detaching the 2 wiring harness clamps and the wiring harness from the claw on the front seat cushion shield and completing the process with bolt and front seat inner belt removal.