OEM 2009 Scion xD PCV Valve

2009 Scion xD Parts Questions & Experts Answers

• Q: How to install the PCV Valve on 2009 Scion xD?

  A: Start by applying Toyota Genuine Adhesive 1324, Three Bond 1324, or equivalent to 2 or 3 threads at the ventilation valve end. Follow the installation steps by applying adhesive to 2 or 3 ventilation valve threads before torquing it up to 20 Nm (204 kgf-cm, 15 ft-lbf) and connecting the ventilation hose. The next installation steps include positioning the intake manifold and attachment of engine oil level dipstick and transmission oil level gauge sub-assembly for automatic transaxle purposes. Following steps involve the installation of the automatic transaxle oil cooler tube together with the starter assembly along with the injector vibration insulator and the No. 1 delivery pipe spacer before adding the fuel delivery pipe sub-assembly. Follow the procedure for installing the fuel tube sub-assembly then apply the fuel pipe clamp before adding the vacuum hose and No. 1 fuel vapor feed hose. The installation steps are harness bracket first and then engine wire harness preceding the air cleaner cap sub-assembly with attached hose. Fasten the cable to the negative battery terminal using 5.4 Nm (55 kgf-cm, 48 in-lbf) torque before adding engine coolant while thoroughly checking for coolant and fuel leakage. Add the No. 2 cylinder head cover followed by engine under cover RH using a torque of 5.0 Nm (51 kgf-cm, 44 in-lbf) and engine under cover LH requiring the same torque value.