OEM 2009 Scion xD Emblem

2009 Scion xD Emblem Parts Q&A

• Q: How to install the No. 2 luggage compartment door name plate and other emblems on 2009 Scion xD?

  A: Place the name plate for No. 2 luggage compartment door onto the back door panel when it reaches 40 to 60 degrees Celsius (104 to 140 degrees Fahrenheit) using an infrared light for 1 to 2 minutes before removing the tape while it is still hot with a cloth. Ensure all tape is removed to prevent adhesion failure, and clean the surface with a non-residue solvent. Establish an installation area at or above 20 degrees Celsius (68 degrees Fahrenheit) but if the working temperature is below this point heat both the back door panel and name plate to a temperature range between 20 to 30 degrees Celsius (68 to 86 degrees Fahrenheit). To prepare the symbol emblem adhesive area, heat and remove the tape on the back door panel then clean with non-residue solvent before and after installation. Screw in the two pins which hold the emblem in place to attach it on the back door panel when the room temperature exceeds 20 degrees Celsius (68 degrees Fahrenheit) or when heat is applied to the components to reach that threshold. When preparing the front panel attachment area for the radiator grille emblem users should heat the double-sided adhesive tape on the engine hood then remove it while hot followed by non-residue solvent cleaning. Insert the provided pins into the engine hood before placing the emblem in place when the temperature remains above 20 degrees Celsius (68 degrees Fahrenheit) or you should apply heat for proper installation.