How to remove the front door Car Speakers on both the RH and LH sides on 2009 Scion xB?

The process to uninstall the front door speaker from both right-hand (RH) and left-hand (LH) sides starts by removing the front door armrest base upper panel and the front door lower frame bracket garnish. You should detach the 3 claws before taking out the front No. 2 speaker assembly. Both the front door inside handle bezel and front door trim board sub-assembly have to be extracted. The front No. 1 speaker requires removal of its connector followed by drilling 3 rivet heads with a drill containing a bit that measures smaller than 4 mm (0.16 in.) to disassemble the speaker unit. Drill the rivet flange circumference while keeping the cut rivet in mind due to its extreme heat. When drilling prevent the tool from joining at an angle to protect both the tool and hole alignment the tool parallel to the rivet head. Finish the drilling operation by pushing out remaining rivet shards and destroy the fragments using a vacuum cleaner inside the door.

OEM 2009 Scion xB Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Car Speakers found

View related parts
2009 Scion xB Door Speaker, Rear
Part Number: 86160-33620
$112.44 MSRP: $152.97
You Save: $40.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Center, Front, Rear; Quarter Panel Speaker; Front Driver Speaker; Rear Driver Speaker; Speaker Assembly, Front; Speaker Assembly, Rear
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 12.6 x 12.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-33620
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 1.5 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Tweeter
Part Number: 86160-68010
$66.82 MSRP: $90.91
You Save: $24.09 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker; Speaker Assembly, Front
- Part Name Code: 86160P
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-68010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2009 Scion xB Quarter Panel Speaker, Rear
Part Number: 86160-13080
$108.89 MSRP: $148.14
You Save: $39.25 (27%)
Product Specifications
- Other Name: Speaker Assembly, Radio; Speaker, Rear; Rear Driver Speaker; Speaker Assembly, Rear
- Position: Rear
- Part Name Code: 86160B
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 86160-13080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2009 Scion xB Car Speakers

Looking for affordable OEM 2009 Scion xB Car Speakers? Explore our comprehensive catalogue of genuine 2009 Scion xB Car Speakers. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Scion xB Parts Questions & Experts Answers

Q: How to remove the front door Car Speakers on both the RH and LH sides on 2009 Scion xB?
A: The process to uninstall the front door speaker from both right-hand (RH) and left-hand (LH) sides starts by removing the front door armrest base upper panel and the front door lower frame bracket garnish. You should detach the 3 claws before taking out the front No. 2 speaker assembly. Both the front door inside handle bezel and front door trim board sub-assembly have to be extracted. The front No. 1 speaker requires removal of its connector followed by drilling 3 rivet heads with a drill containing a bit that measures smaller than 4 mm (0.16 in.) to disassemble the speaker unit. Drill the rivet flange circumference while keeping the cut rivet in mind due to its extreme heat. When drilling prevent the tool from joining at an angle to protect both the tool and hole alignment the tool parallel to the rivet head. Finish the drilling operation by pushing out remaining rivet shards and destroy the fragments using a vacuum cleaner inside the door.