How to install the Canister Purge Valve on 2008 Toyota Yaris?

The first step for installing the 1NZ-FE emission control system Canister Purge Valve involves the installation of the purge VSV and subsequent engagement of the clip to secure the purge VSV connector. The installation of the system requires attaching fuel vapor feed hose No. 2 before fitting fuel vapor feed hose No. 1. The connection will include the negative battery terminal with proper torque settings set at 5.4 Nm (55 kgf-cm, 48 in-lbf).

OEM 2008 Toyota Yaris Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2008 Toyota Yaris Vacuum Switch
Part Number: 25860-21090
$89.57 MSRP: $125.74
You Save: $36.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Vacuum Switching; Vapor Canister Purge Solenoid; Air Injection Check Valve; Delay Valve; Vacuum Valve; Valve
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.5 x 3.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25860-21090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2008 Toyota Yaris Canister Purge Valve

Looking for affordable OEM 2008 Toyota Yaris Canister Purge Valve? Explore our comprehensive catalogue of genuine 2008 Toyota Yaris Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Yaris Canister Purge Valve Parts Q&A

Q: How to install the Canister Purge Valve on 2008 Toyota Yaris?
A: The first step for installing the 1NZ-FE emission control system Canister Purge Valve involves the installation of the purge VSV and subsequent engagement of the clip to secure the purge VSV connector. The installation of the system requires attaching fuel vapor feed hose No. 2 before fitting fuel vapor feed hose No. 1. The connection will include the negative battery terminal with proper torque settings set at 5.4 Nm (55 kgf-cm, 48 in-lbf).