How to install the Canister Purge Valve on Toyota Yaris?

The initial step for installing the Canister Purge Valve is to install the purge VSV before securing the clip to attach the purge VSV connector. Begin the installation of Canister Purge Valve by connecting fuel vapor feed hose No. 2 before moving to fuel vapor feed hose No. 1. The installation of the negative battery-terminal cable must be completed with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) applied.

OEM Toyota Yaris Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
Toyota Yaris Vacuum Switch
Part Number: 25860-21090
$89.49 MSRP: $125.62
You Save: $36.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Vacuum Switching; Vapor Canister Purge Solenoid; Air Injection Check Valve; Delay Valve; Vacuum Valve; Valve
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2018 Toyota Yaris | Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

Toyota Yaris Canister Purge Valve

If you're thinking about purchasing OEM parts for your Toyota Yaris, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris Canister Purge Valve at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Yaris Canister Purge Valve Parts Questions & Experts Answers

Vacuum Switch
25860-21090
Q: How to install the Canister Purge Valve on Toyota Yaris?
A: The initial step for installing the Canister Purge Valve is to install the purge VSV before securing the clip to attach the purge VSV connector. Begin the installation of Canister Purge Valve by connecting fuel vapor feed hose No. 2 before moving to fuel vapor feed hose No. 1. The installation of the negative battery-terminal cable must be completed with a torque of 5.4 Nm (55 kgf-cm, 48 in-lbf) applied.