×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Tundra Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2008 Toyota Tundra Vapor Canister
Part Number: 77740-0C050$591.89 MSRP: $867.42You Save: $275.53 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Canister Assembly, Charcoal
- Part Name Code: 77740
- Item Weight: 7.30 Pounds
- Item Dimensions: 20.4 x 10.1 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77740-0C050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Tundra Vapor Canister
Looking for affordable OEM 2008 Toyota Tundra Vapor Canister? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Vapor Canister. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Tundra Vapor Canister Parts Q&A
- Q: How to install the Vapor Canister on 2008 Toyota Tundra?A: Technicians must install the Evaporative Emission Control Canister for the 1GR-FE engine starting with 4 bolts that need 29 Nm torque (296 kgf-cm, 21 ft-lbf). Follow these steps to connect the wire harness clamp and vent line hose by pushing it into the port then securing it with the retainer after checking for damages to the system. Ensure the air inlet line hose connection by securely attaching it while verifying there are no damages or foreign materials and double-check the secure attachment through both vent hose and valve pulling. Attach the purge line hose along with the pump module connector. Secure the wiring harness clamp bracket through tightening its nut until it reaches 10 Nm (102 kgf-cm, 7 ft-lbf). When all connections have been made users should reconnect the cable to the negative terminal but they should note that specific systems might need initialization following the reconnection.