How to remove the Oil Pressure Switch on 2008 Toyota Tundra?

Starting the 1GR-FE lubrication system oil pressure switch removal requires one to disconnect the negative battery terminal cable before potentially needing system initialization upon reconnection. Next, remove the V-bank cover. To perform the oil pressure switch removal disconnect the connector while using a 24 mm deep socket wrench to extract the switch.

OEM 2008 Toyota Tundra Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Toyota Tundra Oil Pressure Sensor
Part Number: 83530-0E010
$46.39 MSRP: $64.57
You Save: $18.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Oil Pressure; Engine Oil Pressure Switch; Oil Pres Gauge Switch; Pressure Switch; Oil Pressure Sending Unit; Switch; Switch Assembly, Oil Pressure (For Engine); Oil Pressure Switch
- Replaces: 83530-28020, 83530-AA011, 83530-AA010
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 1.8 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 83530-0E010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR, SR5 | 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota Tundra Oil Pressure Switch

Looking for affordable OEM 2008 Toyota Tundra Oil Pressure Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Oil Pressure Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to remove the Oil Pressure Switch on 2008 Toyota Tundra?
A: Starting the 1GR-FE lubrication system oil pressure switch removal requires one to disconnect the negative battery terminal cable before potentially needing system initialization upon reconnection. Next, remove the V-bank cover. To perform the oil pressure switch removal disconnect the connector while using a 24 mm deep socket wrench to extract the switch.