How to install the Center Air Bag Sensor Assembly for the Supplemental Restraint System in a floor shift type vehicle on 2008 Toyota Tundra?

Vehicle technicians must first handle the insulation and maintenance procedure for the floor shift type vehicle by disconnecting the cable from the battery negative (-) terminal followed by a minimum 90-second delay before proceeding. This step enables the prevention of Air Bag and seat belt pretensioner activation. Use three bolts to attach the Air Bag sensor while torquing them to 18 Nm (184 kgf-cm, 13 ft-lbf). Any damage or sign of defects including drops and dents and cracks on the center Air Bag sensor requires a replacement with an all-new unit. When conducting the installation check that SRS wiring remains free from contact with other parts and verify that all components have been secured properly. Connect the holder with connectors while verifying the waterproof sheet has been set correctly. The installation process requires adding the Front Console Box, Rear Console Box Assembly and Console Box Carpet, Rear Console End Panel Sub-Assembly and Upper Console Rear Panel Sub-Assembly, Upper Console Panel Sub-Assembly and Shift Lever Knob Sub-Assembly in succession. Connect the negative battery cable while observing that system initialization after the reconnection process is needed for some systems along with an inspection of the SRS warning light for proper operation.

OEM 2008 Toyota Tundra Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Sensors found

View related parts
2008 Toyota Tundra Front Impact Sensor
Part Number: 89173-09480
$93.84 MSRP: $113.14
You Save: $19.30 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09480
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Position Sensor
Part Number: 89178-06040
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Front Left, Right, Left Track; Air Bag Seat Mat; Occupant Detection.; Air Bag Sensor; Occupant Sensor; Sensor; Sensor, Seat Position Air Bag
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.5 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Position Sensor, Passenger Side
Part Number: 89178-06030
$79.24 MSRP: $111.22
You Save: $31.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Front/Right/Left; Air Bag Seat Sensor Mat; Occupant Detection Sensor; Air Bag Sensor; Occupant Sensor; Sensor, Seat Position Air Bag
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-06030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- 1794 Edition, Base, Capstone, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Side Impact Sensor, Front
Part Number: 89831-0C020
$106.40 MSRP: $128.29
You Save: $21.89 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Side Impact Sensor, Rear
Part Number: 89831-0C040
$121.60 MSRP: $172.14
You Save: $50.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0C040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Tundra Side Impact Sensor, Rear
Part Number: 89831-0C030
$121.72 MSRP: $172.31
You Save: $50.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0C030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tundra Submodels:
- Base, Limited, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Tundra Air Bag Sensor

Looking for affordable OEM 2008 Toyota Tundra Air Bag Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Tundra Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tundra Parts Questions & Experts Answers

Q: How to install the Center Air Bag Sensor Assembly for the Supplemental Restraint System in a floor shift type vehicle on 2008 Toyota Tundra?
A: Vehicle technicians must first handle the insulation and maintenance procedure for the floor shift type vehicle by disconnecting the cable from the battery negative (-) terminal followed by a minimum 90-second delay before proceeding. This step enables the prevention of Air Bag and seat belt pretensioner activation. Use three bolts to attach the Air Bag sensor while torquing them to 18 Nm (184 kgf-cm, 13 ft-lbf). Any damage or sign of defects including drops and dents and cracks on the center Air Bag sensor requires a replacement with an all-new unit. When conducting the installation check that SRS wiring remains free from contact with other parts and verify that all components have been secured properly. Connect the holder with connectors while verifying the waterproof sheet has been set correctly. The installation process requires adding the Front Console Box, Rear Console Box Assembly and Console Box Carpet, Rear Console End Panel Sub-Assembly and Upper Console Rear Panel Sub-Assembly, Upper Console Panel Sub-Assembly and Shift Lever Knob Sub-Assembly in succession. Connect the negative battery cable while observing that system initialization after the reconnection process is needed for some systems along with an inspection of the SRS warning light for proper operation.