How to install the exhaust pipe assembly on 2008 Toyota Tacoma?

A new compression spring should replace any existing spring that shows a measurement less than 40.5 mm (1.594 in.) when checked with vernier calipers. Free length assessment takes place before the 2TR-FE exhaust pipe installation process. A new gasket must be tapped into place by a plastic-faced hammer and wooden block while being checked for correct angle and keeping away from reused gaskets. Release the new gasket from being compressed by installing the exhaust pipe front in the exhaust pipe support. Then secure the 2 bolts and 2 compression springs with 43 Nm (438 kgf-cm, 32 ft-lbf) torque. Connect a new gasket to the exhaust pipe front followed by securing the exhaust pipe tail onto the 4 exhaust pipe supports through tightening both bolts and nuts to 48 Nm (489 kgf-cm, 35 ft-lbf). Set the cable to the negative battery terminal with a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf). Afterward install the oxygen sensor along with the air fuel ratio sensor. Exhaust gas leakage should be tested as the last step.

OEM 2008 Toyota Tacoma Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Pipes found

View related parts
2008 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P010
$532.08 MSRP: $714.20
You Save: $182.12 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 17.20 Pounds
- Item Dimensions: 52.9 x 20.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Pipe
Part Number: 17410-0C100
$1212.07 MSRP: $1626.95
You Save: $414.88 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-0C090
- Part Name Code: 17410
- Item Weight: 11.00 Pounds
- Item Dimensions: 46.8 x 17.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Front Pipe
Part Number: 17450-0P030
$1164.61 MSRP: $1563.24
You Save: $398.63 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 11.00 Pounds
- Item Dimensions: 40.4 x 14.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Pipe
Part Number: 17450-0P020
$1148.15 MSRP: $1541.16
You Save: $393.01 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 22.00 Pounds
- Item Dimensions: 55.1 x 26.5 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Front Pipe
Part Number: 17410-0P020
$1010.03 MSRP: $1355.75
You Save: $345.72 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17410
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.5 x 4.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C110
$493.15 MSRP: $661.95
You Save: $168.80 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.10 Pounds
- Item Dimensions: 51.4 x 19.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2008 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P030
$525.27 MSRP: $705.06
You Save: $179.79 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.80 Pounds
- Item Dimensions: 51.9 x 19.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P020
$465.30 MSRP: $624.57
You Save: $159.27 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.40 Pounds
- Item Dimensions: 52.4 x 19.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- X-Runner | 6 Cyl 4.0 L GAS
View related parts
2008 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C100
$435.72 MSRP: $584.86
You Save: $149.14 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.00 Pounds
- Item Dimensions: 50.9 x 20.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2008 Toyota Tacoma Exhaust Pipe

Looking for affordable OEM 2008 Toyota Tacoma Exhaust Pipe? Explore our comprehensive catalogue of genuine 2008 Toyota Tacoma Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Tacoma Exhaust Pipe Parts Q&A

Q: How to install the exhaust pipe assembly on 2008 Toyota Tacoma?
A: A new compression spring should replace any existing spring that shows a measurement less than 40.5 mm (1.594 in.) when checked with vernier calipers. Free length assessment takes place before the 2TR-FE exhaust pipe installation process. A new gasket must be tapped into place by a plastic-faced hammer and wooden block while being checked for correct angle and keeping away from reused gaskets. Release the new gasket from being compressed by installing the exhaust pipe front in the exhaust pipe support. Then secure the 2 bolts and 2 compression springs with 43 Nm (438 kgf-cm, 32 ft-lbf) torque. Connect a new gasket to the exhaust pipe front followed by securing the exhaust pipe tail onto the 4 exhaust pipe supports through tightening both bolts and nuts to 48 Nm (489 kgf-cm, 35 ft-lbf). Set the cable to the negative battery terminal with a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf). Afterward install the oxygen sensor along with the air fuel ratio sensor. Exhaust gas leakage should be tested as the last step.

Alternate Year Models

2007 Toyota Tacoma Exhaust Pipe 2009 Toyota Tacoma Exhaust Pipe