How to install the exhaust pipe assembly on 2009 Toyota Tacoma?

The installation of the 2TR-FE exhaust pipe assembly begins with verifying the compression spring length using vernier calipers for minimum 40.5 mm (1.594 in.). A shorter number indicates the need to replace the compression spring. A wooden block along with a plastic-faced hammer should be used to install a new gasket until it is properly situated flush with the exhaust manifold while maintaining the correct angle. Always use new gaskets instead of reusing the old ones. Avoid inserting the new gasket into the exhaust manifold when you put on the exhaust pipe front. Screw the exhaust pipe front into the exhaust pipe support while tightening both bolts and compression springs at 43 Nm (438 kgf-cm, 32 ft-lbf). To attach the exhaust pipe tail, users should place a new gasket onto the exhaust pipe front before securing the pipe tail to its 4 supports and setting the 2 bolts and 2 nuts to 48 Nm (489 kgf-cm, 35 ft-lbf). Fasten the oxygen sensor and air fuel ratio sensor onto their respective positions before attaching the cable to the negative battery terminal with 3.9 Nm (40 kgf-cm, 35 in-lbf) torque. Perform a last examination of exhaust gas leakage.

OEM 2009 Toyota Tacoma Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Pipes found

View related parts
2009 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P010
$532.08 MSRP: $714.20
You Save: $182.12 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 17.20 Pounds
- Item Dimensions: 52.9 x 20.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Front Pipe
Part Number: 17410-0C100
$1212.07 MSRP: $1626.95
You Save: $414.88 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front
- Position: Front
- Replaces: 17410-0C090
- Part Name Code: 17410
- Item Weight: 11.00 Pounds
- Item Dimensions: 46.8 x 17.7 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Front Pipe
Part Number: 17450-0P030
$1164.61 MSRP: $1563.24
You Save: $398.63 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 11.00 Pounds
- Item Dimensions: 40.4 x 14.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Front Pipe
Part Number: 17450-0P020
$1148.15 MSRP: $1541.16
You Save: $393.01 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Front; Catalytic Converter, Left; Exhaust Pipe; Converter & Pipe; Pipe Assembly, Exhaust, Front; Catalytic Converter
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17450B
- Item Weight: 22.00 Pounds
- Item Dimensions: 55.1 x 26.5 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17450-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Front Pipe
Part Number: 17410-0P020
$1010.03 MSRP: $1355.75
You Save: $345.72 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust; Catalytic Converter, Right; Exhaust Pipe; Pipe Assembly, Exhaust, Front
- Manufacturer Note: MEXICO SPEC
- Position: Front
- Part Name Code: 17410
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.5 x 4.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17410-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C110
$493.15 MSRP: $661.95
You Save: $168.80 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.10 Pounds
- Item Dimensions: 51.4 x 19.6 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P030
$525.27 MSRP: $705.06
You Save: $179.79 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.80 Pounds
- Item Dimensions: 51.9 x 19.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0P020
$465.30 MSRP: $624.57
You Save: $159.27 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Tail Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.40 Pounds
- Item Dimensions: 52.4 x 19.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0P020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- X-Runner | 6 Cyl 4.0 L GAS
View related parts
2009 Toyota Tacoma Muffler & Tail Pipe
Part Number: 17430-0C100
$435.72 MSRP: $584.86
You Save: $149.14 (26%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly, Exhaust Tail; Muffler; Direct-Fit Exhaust; System Kit; Pipe; Muffler & Pipe; Pipe Assembly, Exhaust, Tail; Muffler
- Part Name Code: 17430
- Item Weight: 16.00 Pounds
- Item Dimensions: 50.9 x 20.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17430-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Tacoma Submodels:
- Base, Pre Runner | 4 Cyl 2.7 L GAS

2009 Toyota Tacoma Exhaust Pipe

Looking for affordable OEM 2009 Toyota Tacoma Exhaust Pipe? Explore our comprehensive catalogue of genuine 2009 Toyota Tacoma Exhaust Pipe. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tacoma Exhaust Pipe Parts Q&A

Q: How to install the exhaust pipe assembly on 2009 Toyota Tacoma?
A: The installation of the 2TR-FE exhaust pipe assembly begins with verifying the compression spring length using vernier calipers for minimum 40.5 mm (1.594 in.). A shorter number indicates the need to replace the compression spring. A wooden block along with a plastic-faced hammer should be used to install a new gasket until it is properly situated flush with the exhaust manifold while maintaining the correct angle. Always use new gaskets instead of reusing the old ones. Avoid inserting the new gasket into the exhaust manifold when you put on the exhaust pipe front. Screw the exhaust pipe front into the exhaust pipe support while tightening both bolts and compression springs at 43 Nm (438 kgf-cm, 32 ft-lbf). To attach the exhaust pipe tail, users should place a new gasket onto the exhaust pipe front before securing the pipe tail to its 4 supports and setting the 2 bolts and 2 nuts to 48 Nm (489 kgf-cm, 35 ft-lbf). Fasten the oxygen sensor and air fuel ratio sensor onto their respective positions before attaching the cable to the negative battery terminal with 3.9 Nm (40 kgf-cm, 35 in-lbf) torque. Perform a last examination of exhaust gas leakage.

Alternate Year Models

2008 Toyota Tacoma Exhaust Pipe 2010 Toyota Tacoma Exhaust Pipe