OEM 2009 Toyota Tacoma Vapor Canister

2009 Toyota Tacoma Vapor Canister Parts Q&A

• Q: How to install a Vapor Canister assembly on 2009 Toyota Tacoma?

  A: The first step in installing the charcoal canister assembly involves connecting the fuel tank vent hose by positioning the connector with its pipe while pushing until the retainer engages while confirming there are no scratches or foreign objects on the bare components. Change the charcoal canister assembly by applying a bolt then two nuts before tightening it to 20 Nm (204 kgf-cm, 15 ft-lbf). The EVAP tube needs to be connected to the corresponding connector. After sealing the breather hose to the charcoal canister using its clamp, workers must install charcoal canister filter No. 2 with one nut torqued to 20 Nm (204 kgf-cm, 15 ft-lbf). Affix the breather hose to the piping system after setting EVAP pipe into the clamp position. The ABS wire harness requires installation of a clamp with a bolt tightened to 14 Nm (142 kgf-cm, 10 ft-lbf). Connect the fuel tank assembly and then link the fuel tank main tube with the fuel tank return tube before utilizing a 3.9 Nm (40 kgf-cm, 35 in-lbf) torque on the negative battery cable. Verify the fuel tank for presence of leaking fuel after installation.