How to remove the Trunk Lid Latch on 2008 Toyota Sequoia?

You must first remove the power back door rod whenever it exists before you start to take out the back door lock. Start by separating the back door center garnish then remove the side garnish on both right and left positions. The back door lock removal starts with taking off the back door strap cover followed by removing the back door pull strap. The next step requires removing both back door trim board assembly and back door service hole cover. nictivate the removal of the back door lock protector. The lock removal process starts with vehicle connector detachment and clamp separation and includes bolt removal of three back door lock fasteners for cars lacking power assisted door functions. To retrieve the back door lock a power back door car requires disconnecting the connector and disengaging the clamp followed by removing the 4 bolts.

OEM 2008 Toyota Sequoia Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Lid Latches found

View related parts
2008 Toyota Sequoia Lock Actuator
Part Number: 69110-0C041
$186.74 MSRP: $266.61
You Save: $79.87 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Motor Back Door; Tailgate/Trunk/Door Lock Actuator Motor; Door Lock Actuator; Lock Assembly; Lock Assembly, Back Door W/Motor
- Replaces: 69110-0C040
- Part Name Code: 69110A
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69110-0C041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Lock Actuator
Part Number: 69110-0C031
$186.74 MSRP: $266.61
You Save: $79.87 (30%)
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Motor Back Door; Tailgate/Trunk/Door Lock Actuator Motor; Door Lock Actuator; Lock Assembly; Lock Assembly, Back Door W/Motor
- Replaces: 69110-0C030
- Part Name Code: 69110A
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69110-0C031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Trunk Lid Latch

Looking for affordable OEM 2008 Toyota Sequoia Trunk Lid Latch? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Trunk Lid Latch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Trunk Lid Latch Parts Q&A

Q: How to remove the Trunk Lid Latch on 2008 Toyota Sequoia?
A: You must first remove the power back door rod whenever it exists before you start to take out the back door lock. Start by separating the back door center garnish then remove the side garnish on both right and left positions. The back door lock removal starts with taking off the back door strap cover followed by removing the back door pull strap. The next step requires removing both back door trim board assembly and back door service hole cover. nictivate the removal of the back door lock protector. The lock removal process starts with vehicle connector detachment and clamp separation and includes bolt removal of three back door lock fasteners for cars lacking power assisted door functions. To retrieve the back door lock a power back door car requires disconnecting the connector and disengaging the clamp followed by removing the 4 bolts.