How to install the back door power window motor and related components on 2008 Toyota Sequoia?

The procedure for installing the back door power window motor begins by applying MP grease according to the provided illustration and using the holding tool for alignment with the motor housing. Apply pressure on the wire guide together with the drum until the drum fits the motor housing while making adjustments to the glass installation bracket when the motor's drive shaft line is not perfectly aligned with the drum. Install the power window regulator base plate using two screws while the power window regulator motor should be attached to the back door power window regulator. Install the back door power window regulator assembly as the final step alongside back door glass and back door glass run followed by back door glass outer Weather Strip assembly. The installation process requires use of 5 clips to apply new back door outside moulding at both right and left sides. Continue with the sequence of installing the components as follows: rear wiper motor grommet, rear wiper motor assembly, rear wiper blade assembly, and rear wiper arm head cap. The procedure requires a service hole cover on the No. 2 back door position followed by the installation of the multiplex network body ECU along with Power Back Door capability. Finally, the technician must complete the process by applying the service hole cover. After installing the back door trim board assembly the worker must add the back door pull strap followed by the back door strap cover then secure the back door side garnish on each side as well as the back door center garnish.

OEM 2008 Toyota Sequoia Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Window Motors found

View related parts
2008 Toyota Sequoia Window Motor, Passenger Side
Part Number: 85710-0C140
$333.46 MSRP: $476.10
You Save: $142.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Rear; Motor; Motor Assembly, Power Window Regulator, Passenger Side
- Position: Passenger Side
- Part Name Code: 85710G
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85710-0C140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Window Motor
Part Number: 85720-AE010
$316.54 MSRP: $451.95
You Save: $135.41 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Motor, Center Left, Front Left, Rear Left, Rear Right; Door Lock Actuator; Motor; Power Window Regulator Assembly for Front Driver, Passenger, and Driver Side.
- Replaces: 85720-35140
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 4.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85720-AE010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Window Motor, Driver Side
Part Number: 85720-0C031
$333.46 MSRP: $476.10
You Save: $142.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Front Left; Motor Assembly; Power Window Regulator, Front Driver Side
- Manufacturer Note: PLATINUM
- Position: Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.5 x 5.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85720-0C031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Window Motor, Passenger Side
Part Number: 85710-0C101
$333.46 MSRP: $476.10
You Save: $142.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Power Window Motor, Front Right; Motor Assembly; Power Window Regulator, Front Passenger Side
- Manufacturer Note: PLATINUM
- Position: Passenger Side
- Replaces: 85710-0C100
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.5 x 4.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85710-0C101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2008 Toyota Sequoia Window Motor
Part Number: 85710-AE010
$316.54 MSRP: $451.95
You Save: $135.41 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly, Power Window Regulator; Center Right, Front Right, Rear Left, Rear Right, Right; Motor; Power Window Regulator Assembly for Front Passenger, Driver, and Passenger Side.
- Replaces: 85710-35180
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.7 x 4.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 85710-AE010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Window Motor

Looking for affordable OEM 2008 Toyota Sequoia Window Motor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Window Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the back door power window motor and related components on 2008 Toyota Sequoia?
A: The procedure for installing the back door power window motor begins by applying MP grease according to the provided illustration and using the holding tool for alignment with the motor housing. Apply pressure on the wire guide together with the drum until the drum fits the motor housing while making adjustments to the glass installation bracket when the motor's drive shaft line is not perfectly aligned with the drum. Install the power window regulator base plate using two screws while the power window regulator motor should be attached to the back door power window regulator. Install the back door power window regulator assembly as the final step alongside back door glass and back door glass run followed by back door glass outer Weather Strip assembly. The installation process requires use of 5 clips to apply new back door outside moulding at both right and left sides. Continue with the sequence of installing the components as follows: rear wiper motor grommet, rear wiper motor assembly, rear wiper blade assembly, and rear wiper arm head cap. The procedure requires a service hole cover on the No. 2 back door position followed by the installation of the multiplex network body ECU along with Power Back Door capability. Finally, the technician must complete the process by applying the service hole cover. After installing the back door trim board assembly the worker must add the back door pull strap followed by the back door strap cover then secure the back door side garnish on each side as well as the back door center garnish.