Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor
Position: Rear Driver Side
Replaces: 73570-42010-E2
Item Weight: 2.60 Pounds
Condition: New
SKU: 73570-42011-E2
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 2 |Next >
1-20 of 37 Results
2008 Toyota RAV4 Seat Belt
Looking for affordable OEM 2008 Toyota RAV4 Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota RAV4 Seat Belt Parts Q&A
Q: What is the correct procedure for activating and disposing of a front seat outer belt with a seat belt pretensioner using Special Service Tool 09082-00700, both when installed and when removed on 2008 Toyota RAV4?
A: You must activate seat belt pretensioners before proceeding with the scrapping of vehicles that have pretensioners or when disposing of front seat outer belts that incorporate pretensioners. Contact the service department of Toyota Motor Sales U.S.A. Inc. if any unusual incident arises when activating the system. Front seat outer belts must not be discarded when the pretensioner system remains unactivated because the pretensioner generates a loud noise before activation. Activation of a front seat outer belt pretensioner requires you to stand at minimum 10 m (33 ft.) distance while using gloves and safety glasses when dealing with activated pretensioners. Wash your hands with water right after completion of disposal while never applying water to a pretensioner that has become activated. Follow procedures at least ten meters from electrical fields while using the specified Special Service Tool (SST: 09082-00700) for activation purposes. For disposing of the front seat outer belt assembly installed on vehicles activate a pretensioner using a prepared battery while checking the SST functionality then attach the SST red outlet to the battery positive terminal and connect the black outlet to the negative terminal with no yellow connector present during the procedure. Next activate the SST by pressing its switch until the LED lights up before ending your connection of both SST and pretensioner. Choose the required interior trim components then link the Air Bag Deployment Tool to Air Bag Deployment Wire Subharness No.5. Activate the pretensioner using proper guidelines while making sure the vehicle area stays clear of people within 10 m (33 ft.) of distance. The process of pretensioner activation requires disposals of the front seat outer belt following a thirty-minute waiting period before touching it. The following steps must be performed for disposing of a seat belt which operates independently from a vehicle: first wind the seat belt with the built-in retractor followed by cutting it to 100 mm (0.39 in.) from the retractor then verifying the SST operation before connecting the Air Bag Deployment Tool to the pretensioner while placing a tire over the belt and specifying a 10 m (33 ft.) safety zone around the wheel. Secure the activated tire and SST while placing the belt inside a plastic bag then tightly tie it before disposal as general auto parts.