How to install the front speed sensor on 2008 Toyota Prius?

The installation of the front speed sensor requires ensuring the sensor wire harness remains untwisted while also checking for foreign material on the speed sensor tip and connecting section; clean the tug if needed before installation. The sensor can be attached by tightening the bolt to 8.0 Nm (82 kgf-cm, 71 in-lbf) before securing the clip on the front shock absorber. Secure the sensor clamps to the body and front shock absorber using the proper procedure where bolt A needs 8.0 Nm (82 kgf-cm, 71 in-lbf) while bolt B requires 19 Nm (192 kgf-cm, 14 ft-lbf). Additionally, tighten bolt B at the same time that you replace the brake flexible hose clamp located above the sensor clamp. The sensor connector should be connected before installing the front fender liner and front wheel while tightening them with a torque of 103 Nm (1,050 kgf-cm, 76 ft-lbf). As the last step check the ABS speed sensor signal.

OEM 2008 Toyota Prius Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
2008 Toyota Prius Speed Sensor, Front Driver Side
Part Number: 89543-47020
$238.11 MSRP: $339.97
You Save: $101.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Left-Hand; ABS Wheel Speed Sensor, Front Left; ABS Sensor; Front Speed Sensor; Sensor, Speed, Front Driver Side; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Part Name Code: 89543
- Item Weight: 1.10 Pounds
- Item Dimensions: 18.2 x 13.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89543-47020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius Speed Sensor, Front Passenger Side
Part Number: 89542-47020
$238.11 MSRP: $339.97
You Save: $101.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Part Name Code: 89542
- Item Weight: 1.10 Pounds
- Item Dimensions: 10.3 x 6.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89542-47020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Prius ABS Sensor, Rear
Part Number: 89544-20010
$188.02 MSRP: $230.59
You Save: $42.57 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Skid Control; ABS Wheel Speed Sensor, Rear Left, Rear Right; Sensor Ring; Rear Sensor Ring
- Manufacturer Note: NSK
- Position: Rear
- Replaces: 89544-47010
- Part Name Code: 89544
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.9 x 6.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89544-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Speed Sensor

Looking for affordable OEM 2008 Toyota Prius Speed Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to install the front speed sensor on 2008 Toyota Prius?
A: The installation of the front speed sensor requires ensuring the sensor wire harness remains untwisted while also checking for foreign material on the speed sensor tip and connecting section; clean the tug if needed before installation. The sensor can be attached by tightening the bolt to 8.0 Nm (82 kgf-cm, 71 in-lbf) before securing the clip on the front shock absorber. Secure the sensor clamps to the body and front shock absorber using the proper procedure where bolt A needs 8.0 Nm (82 kgf-cm, 71 in-lbf) while bolt B requires 19 Nm (192 kgf-cm, 14 ft-lbf). Additionally, tighten bolt B at the same time that you replace the brake flexible hose clamp located above the sensor clamp. The sensor connector should be connected before installing the front fender liner and front wheel while tightening them with a torque of 103 Nm (1,050 kgf-cm, 76 ft-lbf). As the last step check the ABS speed sensor signal.