How to install the Yaw Sensor and perform the necessary calibration on 2008 Toyota Prius?

The Yaw Rate Sensor installation requires securing it with two bolts at 19 Nm (194 kgf-cm, 14 ft-lbf) torque before connecting the sensor connector. Proceed with the installation of the rear console box sub-assembly then install the console box carpet and console box pocket. The process begins by installing the Yaw Rate Sensor using its two bolts tightened to 19 Nm (194 kgf-cm, 14 ft-lbf). Next, connect the sensor connector. Perform the yaw rate sensor zero point calibration followed by an examination and clearing of the DTC.

OEM 2008 Toyota Prius Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2008 Toyota Prius Yaw Rate Sensor
Part Number: 89180-47010
$535.71 MSRP: $785.08
You Save: $249.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Yawrate; Suspension Yaw Sensor; Yaw Sensor; Sensor, Yawrate
- Part Name Code: 89183A
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.4 x 4.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89180-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Prius Submodels:
- Base, Touring | 4 Cyl 1.5 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Prius Yaw Sensor

Looking for affordable OEM 2008 Toyota Prius Yaw Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Prius Yaw Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Prius Parts Questions & Experts Answers

Q: How to install the Yaw Sensor and perform the necessary calibration on 2008 Toyota Prius?
A: The Yaw Rate Sensor installation requires securing it with two bolts at 19 Nm (194 kgf-cm, 14 ft-lbf) torque before connecting the sensor connector. Proceed with the installation of the rear console box sub-assembly then install the console box carpet and console box pocket. The process begins by installing the Yaw Rate Sensor using its two bolts tightened to 19 Nm (194 kgf-cm, 14 ft-lbf). Next, connect the sensor connector. Perform the yaw rate sensor zero point calibration followed by an examination and clearing of the DTC.