OEM 2007 Toyota Prius Yaw Sensor

2007 Toyota Prius Parts Questions & Experts Answers

• Q: How to Service and Repair a Yaw Sensor on 2007 Toyota Prius?

  A: The Yaw Rate and Deceleration Sensor service process begins with removing the upper console panel sub-assembly together with console box pocket and console box carpet followed by rear console box sub-assembly. Initially detach the connector after removing two bolts that anchor the yaw rate sensor. The installation requires the new sensor to be fixed with the two bolts and you must tighten them to 19 N.m while performing a torque of 194 kgf.cm or 14 ft.lbf before reconnecting the sensor connector. Installation requires placing the rear console box sub-assembly followed by console box carpet and console box pocket and then upper console panel sub-assembly. The yaw rate sensor zero point calibration must be performed followed by checking and clearing any DTC after installation.