×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2008 Toyota Prius A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2008 Toyota Prius Condenser
Part Number: 88450-47020$248.87 MSRP: $355.32You Save: $106.45 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Condenser Assembly, With Receiver; A/C Condenser; Condenser Assembly, W/Receiver
- Part Name Code: 88450
- Item Weight: 8.60 Pounds
- Item Dimensions: 30.2 x 18.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88450-47020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Prius Condenser
Part Number: 88460-AZ010$124.27 MSRP: $175.65You Save: $51.38 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Condenser Assembly; A/C Condenser
- Item Weight: 5.30 Pounds
- Condition: New
- SKU: 88460-AZ010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Prius A/C Condenser
Looking for affordable OEM 2008 Toyota Prius A/C Condenser? Explore our comprehensive catalogue of genuine 2008 Toyota Prius A/C Condenser. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Prius A/C Condenser Parts Q&A
- Q: How to install an A/C Condenser assembly and charge the refrigerant on 2008 Toyota Prius?A: Before installation of the condenser assembly with receiver use 2 bolts that need a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf) and follow new condenser replacement with 40 cc (1.4 fl. oz.) of ND-OIL 11 or its equivalent compressor oil. The installation requires fixing the two angles onto the condenser unit. The installation of radiator support sub-assembly upper RH requires 4 bolts tightened to 5.0 Nm (51 kgf-cm, 44 in-lbf), 3.9 Nm (40 kgf-cm, 35 in-lbf) and 7.5 Nm (76 kgf-cm, 66 in-lbf). Apply the same installation method to connect the radiator support sub-assembly upper LH. To connect pipe E for cooler refrigerant liquid to the cooler unit, users should remove existing vinyl tape from disconnected components followed by installing a new O-ring before applying ND-OIL 11 on both the O-ring and fitting surfaces. The condenser pipe needs to be attached using a bolt tightened to 5.4 Nm (55 kgf-cm, 47 in-lbf). The discharge hose sub-assembly demands the same procedure of vinyl tape removal followed by an O-ring installation and ND-OIL 11 application before securing it to the condenser with a bolt at 5.4 Nm (55 kgf-cm, 47 in-lbf). Follow instructions to assemble the No. 1 inverter bracket in addition to front bumper cover and both front fender liners right-hand and left-hand. To complete the procedure you need to charge the refrigerant system followed by compressor warm-up and leak inspection.