How is the Seat Belt Rear Seat Outer Assembly Installed and Serviced on 2008 Toyota Matrix?

A successful ELR test requires checking the belt functionality through gentle belt tilting followed by pulling the belt; proper operation occurs only when the belt locks over 45 degrees and does not lock up to 15 degrees of tilt in all directions. The rear seat belt assembly outer needs replacement when it does not function according to specifications. The rear seat belt assembly outer requires attachment to the retractor side with a bolt where the upper bolt requires 4.9 Nm (50 kgf-cm, 43 in-lbf) torque and the lower bolt needs 41.2 Nm (420 kgf-cm, 30 ft-lbf). Install the rear seat belt assembly outer at the floor anchor position with a bolt that requires torquing to 41.2 Nm (420 kgf-cm, 30 ft-lbf). Keep the anchor part from touching the protruding floor panel section. The back seat belt assembly outer can be checked using a quick pull motion to check if the ELR mechanism locks in place. A new rear seat belt assembly will be needed if the ELR does not function properly. When testing the fastening capabilities of the child restraint system check that pulling the belt from full stretch initiates automatic belt retraction; it must also allow belt extension and retraction after full retraction. A rear seat belt assembly outer needs replacement if these functions fail. Next install the deck trim side panel assembly LH followed by its RH counterpart and proceed to install the rear seat side garnish LH followed by its RH companion and then move on to the rear seat cushion assembly with its seatback component before installing the deck trim cover rear and back door Weather Strip and luggage compartment tray and deck floor box rear and deck board sub-assembly and deck board No.2 and tonneau cover assembly followed by rear door opening trim LH and RH and finally rear door scuff plates LH and RH.

OEM 2008 Toyota Matrix Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2008 Toyota Matrix Lap & Shoulder Belt, Passenger Side
Part Number: 73210-02142-B1
$253.26 MSRP: $361.60
You Save: $108.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Right, Right; Belt & Retractor; Belt Assembly, Front Seat Outer, Passenger Side
- Position: Passenger Side
- Part Name Code: 73210
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.3 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73210-02142-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Lap & Shoulder Belt, Center
Part Number: 73350-01041-B2
$157.79 MSRP: $223.37
You Save: $65.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat L; Seat Belt Lap and Shoulder Belt, Rear Center; Center Belt Assembly; Belt Assembly, Rear Seat, Outer Center
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Center
- Part Name Code: 73350C
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73350-01041-B2
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Buckle, Driver Side
Part Number: 73230-01040-B0
$49.10 MSRP: $68.35
You Save: $19.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Left; Latch; Belt Assembly, Front Seat Inner, Driver Side
- Manufacturer Note: DK.GRAY,TRIM13,14
- Position: Driver Side
- Part Name Code: 73240
- Item Weight: 0.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-01040-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Buckle, Inner
Part Number: 73380-01040-B0
$26.16 MSRP: $36.41
You Save: $10.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Receptacle, Rear Right; Latch; Belt Assembly, Rear Seat, Inner
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Inner
- Part Name Code: 73380A
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.2 x 6.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73380-01040-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Lap & Shoulder Belt, Driver Side
Part Number: 73220-02132-B1
$253.26 MSRP: $361.60
You Save: $108.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Lap and Shoulder Belt, Front Left, Left; Belt & Retractor; Belt Assembly, Front Seat Outer, Driver Side
- Position: Driver Side
- Part Name Code: 73220
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.5 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73220-02132-B1
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Lap & Shoulder Belt, Outer Passenger Side
Part Number: 73360-01100-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Right; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Passenger Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Outer Passenger Side
- Part Name Code: 73360
- Item Weight: 2.50 Pounds
- Item Dimensions: 12.4 x 11.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73360-01100-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Lap & Shoulder Belt, Outer Driver Side
Part Number: 73370-01100-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat; Seat Belt Lap and Shoulder Belt, Rear Left; Belt & Retractor; Belt Assembly, Rear Seat 3 Point Type, Outer Driver Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Outer Driver Side
- Part Name Code: 73370
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73370-01100-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Buckle, Driver Side
Part Number: 73480-01030-B0
Product Specifications
- Other Name: Belt Assembly, Rear Seat I; Seat Belt Receptacle, Rear Left; Latch; Belt Assembly, Rear Seat Inner W/Center, Driver Side
- Manufacturer Note: DK. GRAY,TRIM13,14
- Position: Driver Side
- Part Name Code: 73480
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.4 x 9.3 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73480-01030-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Buckle, Passenger Side
Part Number: 73230-01050-B0
$55.91 MSRP: $77.83
You Save: $21.92 (29%)
Product Specifications
- Other Name: Belt Assembly, Front Seat; Seat Belt Receptacle, Front Right; Latch; Belt Assembly, Front Seat Inner, Passenger Side
- Manufacturer Note: DK.GRAY,TRIM13,14
- Position: Passenger Side
- Part Name Code: 73230
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.1 x 11.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 73230-01050-B0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS

2008 Toyota Matrix Seat Belt

Looking for affordable OEM 2008 Toyota Matrix Seat Belt? Explore our comprehensive catalogue of genuine 2008 Toyota Matrix Seat Belt. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Matrix Parts Questions & Experts Answers

Q: How is the Seat Belt Rear Seat Outer Assembly Installed and Serviced on 2008 Toyota Matrix?
A: A successful ELR test requires checking the belt functionality through gentle belt tilting followed by pulling the belt; proper operation occurs only when the belt locks over 45 degrees and does not lock up to 15 degrees of tilt in all directions. The rear seat belt assembly outer needs replacement when it does not function according to specifications. The rear seat belt assembly outer requires attachment to the retractor side with a bolt where the upper bolt requires 4.9 Nm (50 kgf-cm, 43 in-lbf) torque and the lower bolt needs 41.2 Nm (420 kgf-cm, 30 ft-lbf). Install the rear seat belt assembly outer at the floor anchor position with a bolt that requires torquing to 41.2 Nm (420 kgf-cm, 30 ft-lbf). Keep the anchor part from touching the protruding floor panel section. The back seat belt assembly outer can be checked using a quick pull motion to check if the ELR mechanism locks in place. A new rear seat belt assembly will be needed if the ELR does not function properly. When testing the fastening capabilities of the child restraint system check that pulling the belt from full stretch initiates automatic belt retraction; it must also allow belt extension and retraction after full retraction. A rear seat belt assembly outer needs replacement if these functions fail. Next install the deck trim side panel assembly LH followed by its RH counterpart and proceed to install the rear seat side garnish LH followed by its RH companion and then move on to the rear seat cushion assembly with its seatback component before installing the deck trim cover rear and back door Weather Strip and luggage compartment tray and deck floor box rear and deck board sub-assembly and deck board No.2 and tonneau cover assembly followed by rear door opening trim LH and RH and finally rear door scuff plates LH and RH.

Related 2008 Toyota Matrix Parts

Alternate Year Models

2007 Toyota Matrix Seat Belt 2009 Toyota Matrix Seat Belt