How to remove the ABS Control Module for the Antilock Brakes on 2008 Toyota Matrix?

The first step for Hydraulic Control Assembly removal from Antilock Brakes demands users to drain brake fluid then prompt immediate cleaning of any paint-layered fluid residues. Begin by taking out the front wheel RH and then detach the front fender liner RH before you can take off the front bumper cover. The next step involves removing both the LH headlight assembly together with the windshield washer jar assembly. Begin by removing the actuator connector and utilize Special Service Tool: 09023-00101 to disconnect six brake tubes which are attached to the bracket. Proper labeling must be performed for future reinstallation. Separate the actuator with bracket by removing two bolts and a nut with caution toward the brake tubes and wire harness. The ABS and traction actuator assembly comes off from its bracket through the removal of two nuts.

OEM 2008 Toyota Matrix ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Toyota Matrix Modulator Valve
Part Number: 44050-12200
$1159.08 MSRP: $1459.07
You Save: $299.99 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Pump And Motor Assembly; ABS Control Module; Actuator Assembly; Actuator Assembly, ABS & Traction
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.1 x 6.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR, XRS | 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Matrix Actuator Assembly
Part Number: 44050-01040
$888.81 MSRP: $1118.83
You Save: $230.02 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Pump And Motor Assembly; ABS Control Module
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.9 x 7.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Matrix Submodels:
- Base, XR | 4 Cyl 1.8 L GAS

2008 Toyota Matrix ABS Control Module

Looking for affordable OEM 2008 Toyota Matrix ABS Control Module? Explore our comprehensive catalogue of genuine 2008 Toyota Matrix ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Matrix Parts Questions & Experts Answers

Q: How to remove the ABS Control Module for the Antilock Brakes on 2008 Toyota Matrix?
A: The first step for Hydraulic Control Assembly removal from Antilock Brakes demands users to drain brake fluid then prompt immediate cleaning of any paint-layered fluid residues. Begin by taking out the front wheel RH and then detach the front fender liner RH before you can take off the front bumper cover. The next step involves removing both the LH headlight assembly together with the windshield washer jar assembly. Begin by removing the actuator connector and utilize Special Service Tool: 09023-00101 to disconnect six brake tubes which are attached to the bracket. Proper labeling must be performed for future reinstallation. Separate the actuator with bracket by removing two bolts and a nut with caution toward the brake tubes and wire harness. The ABS and traction actuator assembly comes off from its bracket through the removal of two nuts.