How to service and repair the Canister Purge Valve on 2008 Toyota Land Cruiser?

The first step to fix or service the Canister Purge Valve is to disconnect the battery cable from the terminal with the negative mark. The next step requires the removal of V-bank cover sub-assembly. The two purge line hoses should be disconnected one after another. The purge VSV connector should be disconnected first followed by removal of the bolt to extract the purge VSV.

OEM 2008 Toyota Land Cruiser Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2008 Toyota Land Cruiser Valve Assembly, Vacuum Switching, Front
Part Number: 25860-0S020
$89.49 MSRP: $125.62
You Save: $36.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Secondary Air Injection Check Valve; Vacuum Delay Valve; Diverter Valve
- Position: Front
- Replaces: 25860-31060
- Part Name Code: 25860
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.7 x 3.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25860-0S020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Land Cruiser Submodels:
- Base, Heritage Edition | 8 Cyl 5.7 L GAS

2008 Toyota Land Cruiser Canister Purge Valve

Looking for affordable OEM 2008 Toyota Land Cruiser Canister Purge Valve? Explore our comprehensive catalogue of genuine 2008 Toyota Land Cruiser Canister Purge Valve. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Land Cruiser Parts Questions & Experts Answers

Q: How to service and repair the Canister Purge Valve on 2008 Toyota Land Cruiser?
A: The first step to fix or service the Canister Purge Valve is to disconnect the battery cable from the terminal with the negative mark. The next step requires the removal of V-bank cover sub-assembly. The two purge line hoses should be disconnected one after another. The purge VSV connector should be disconnected first followed by removal of the bolt to extract the purge VSV.