How to install the fuel pressure regulator assembly on 2008 Toyota Highlander?

One must apply spindle oil or gasoline to a new O-ring before installing it onto the assembly for fuel pressure pulsation damper installation. Install the fuel pressure pulsation damper assembly onto the delivery pipe through the use of the provided clip for attachment. First install the No. 1 surge tank stay while facing the throttle body bracket and putting on the intake air surge tank assembly. Tighten the No. 1 surge tank stay along with the throttle body bracket to their completely tightened positions. Fasten the air cleaner cap sub-assembly to the vehicle before connecting the battery cable to the terminal which is located on the negative side. The mechanic should inspect both the SRS warning light and search for fuel leaks. Engine coolant needs addition while checking for any leaking coolant. The V-bank cover must be installed before moving on to the outer cowl top panel sub-assembly followed by windshield wiper motor and link assembly and cowl top ventilator louver sub-assembly and both left and right front wiper arm and blade assemblies. The procedure ends by fitting both the No. 1 engine under cover and the engine under cover assembly to their respective locations.

OEM 2008 Toyota Highlander Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Pressure Regulators found

View related parts
2008 Toyota Highlander Damper Set, Fuel Pressure Pulsation
Part Number: 23207-20011
$92.92 MSRP: $130.42
You Save: $37.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: DAMPER SET, FUEL PRE; Fuel Pressure Damper; Fuel Pump Pulsator
- Replaces: 23207-46010, 23270-62010, 23270-62011, 23207-20010, 23207-74010
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.2 x 2.0 inches
- Condition: New
- SKU: 23207-20011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2008 Toyota Highlander Fuel Pressure Regulator
Part Number: 23280-21010
$80.49 MSRP: $112.98
You Save: $32.49 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Part Name Code: 23280J
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 4.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23280-21010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Base, LE, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Highlander Fuel Pressure Regulator
Part Number: 23020-0A010
$101.00 MSRP: $141.77
You Save: $40.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Replaces: 23020-20010
- Part Name Code: 23280
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.9 x 4.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23020-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Highlander Fuel Pressure Regulator

Looking for affordable OEM 2008 Toyota Highlander Fuel Pressure Regulator? Explore our comprehensive catalogue of genuine 2008 Toyota Highlander Fuel Pressure Regulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Highlander Parts Questions & Experts Answers

Q: How to install the fuel pressure regulator assembly on 2008 Toyota Highlander?
A: One must apply spindle oil or gasoline to a new O-ring before installing it onto the assembly for fuel pressure pulsation damper installation. Install the fuel pressure pulsation damper assembly onto the delivery pipe through the use of the provided clip for attachment. First install the No. 1 surge tank stay while facing the throttle body bracket and putting on the intake air surge tank assembly. Tighten the No. 1 surge tank stay along with the throttle body bracket to their completely tightened positions. Fasten the air cleaner cap sub-assembly to the vehicle before connecting the battery cable to the terminal which is located on the negative side. The mechanic should inspect both the SRS warning light and search for fuel leaks. Engine coolant needs addition while checking for any leaking coolant. The V-bank cover must be installed before moving on to the outer cowl top panel sub-assembly followed by windshield wiper motor and link assembly and cowl top ventilator louver sub-assembly and both left and right front wiper arm and blade assemblies. The procedure ends by fitting both the No. 1 engine under cover and the engine under cover assembly to their respective locations.