How to Service and Repair a Fuel Pressure Regulator on 2009 Toyota Highlander?

Start the fuel pressure regulator removal process by taking out the fuel suction tube assembly with pump and gauge while protecting the welded tube from disconnection from the plate. The fuel suction plate sub-assembly with fuel filter extraction begins by using needle nozzle pliers to detach the E-ring then disconnect the fuel pump harness connector and unfasten the 2 claws of the No. 1 fuel suction support. Then use a screwdriver with protective tape to take off the spring from the fuel suction plate and also break the claw of the jet pump nozzle before extracting the fuel pump filter hose. A screwdriver with tape-wrapped tip can be used to remove the 5 claws on the filter which will enable extraction of the fuel pump but users should avoid damaging the fuel filter or suction filter. After disconnection of the fuel pump connector with its harness you should carefully separate the O-ring and spacer from the fuel pump while maintaining the sealing surface free from harm. A wire tip (1.0 millimeter in diameter) can be used to retrieve the O-ring when it stays inside the fuel filter. You need to disengage both claws on the filter until you successfully remove the No. 1 fuel suction support. The last step requires removal of the fuel pressure regulator assembly from the fuel filter and subsequent removal of its two O-rings.

OEM 2009 Toyota Highlander Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Pressure Regulators found

View related parts
2009 Toyota Highlander Damper
Part Number: 23270-36031
$103.78 MSRP: $145.67
You Save: $41.89 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly, Fuel Pressure Pulsation; Fuel Pressure Damper
- Replaces: 23270-36010
- Part Name Code: 23270
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.0 x 2.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23270-36031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, LE, Plus, SE | 4 Cyl 2.7 L GAS
View related parts
2009 Toyota Highlander Damper Set, Fuel Pressure Pulsation
Part Number: 23207-20011
$92.92 MSRP: $130.42
You Save: $37.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: DAMPER SET, FUEL PRE; Fuel Pressure Damper; Fuel Pump Pulsator
- Replaces: 23207-46010, 23270-62010, 23270-62011, 23207-20010, 23207-74010
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.2 x 2.0 inches
- Condition: New
- SKU: 23207-20011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, Hybrid, Hybrid Limited, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.3 L GAS
View related parts
2009 Toyota Highlander Fuel Pressure Regulator
Part Number: 23280-21010
$80.49 MSRP: $112.98
You Save: $32.49 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Part Name Code: 23280J
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 4.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23280-21010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Base, LE, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Highlander Fuel Pressure Regulator
Part Number: 23020-0A010
$101.00 MSRP: $141.77
You Save: $40.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Fuel; Fuel Injection Pressure Regulator; Pressure Regulator; Regulator Assembly, Fuel Pressure
- Replaces: 23020-20010
- Part Name Code: 23280
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.9 x 4.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23020-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Highlander Submodels:
- Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

2009 Toyota Highlander Fuel Pressure Regulator

Looking for affordable OEM 2009 Toyota Highlander Fuel Pressure Regulator? Explore our comprehensive catalogue of genuine 2009 Toyota Highlander Fuel Pressure Regulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Highlander Parts Questions & Experts Answers

Q: How to Service and Repair a Fuel Pressure Regulator on 2009 Toyota Highlander?
A: Start the fuel pressure regulator removal process by taking out the fuel suction tube assembly with pump and gauge while protecting the welded tube from disconnection from the plate. The fuel suction plate sub-assembly with fuel filter extraction begins by using needle nozzle pliers to detach the E-ring then disconnect the fuel pump harness connector and unfasten the 2 claws of the No. 1 fuel suction support. Then use a screwdriver with protective tape to take off the spring from the fuel suction plate and also break the claw of the jet pump nozzle before extracting the fuel pump filter hose. A screwdriver with tape-wrapped tip can be used to remove the 5 claws on the filter which will enable extraction of the fuel pump but users should avoid damaging the fuel filter or suction filter. After disconnection of the fuel pump connector with its harness you should carefully separate the O-ring and spacer from the fuel pump while maintaining the sealing surface free from harm. A wire tip (1.0 millimeter in diameter) can be used to retrieve the O-ring when it stays inside the fuel filter. You need to disengage both claws on the filter until you successfully remove the No. 1 fuel suction support. The last step requires removal of the fuel pressure regulator assembly from the fuel filter and subsequent removal of its two O-rings.