How to reassemble the Clutch Master Cylinder on 2008 Toyota Corolla?

The procedure to assemble the Clutch Master Cylinder starts with covering parts with lithium soap base glycol grease. After obtaining the piston with spring you must put them into the cylinder while avoiding any damage to the interior of the cylinder body. You should install the stop plate onto the push rod followed by adding the push rod to the cylinder body. Snap ring pliers enable installation of the snap ring when pushing the push rod. Secure the cylinder boot onto the body section then fasten the lock nut to the push rod. Install the clevis together with its lock nut onto the push rod before you install both the inlet union and a new grommet. Frame the slotted spring pin with a pin punch and hammer until it extends between 1.5 to 3.5 mm (0.059 to 0.138 in.).

OEM 2008 Toyota Corolla Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Master Cylinders found

View related parts
2008 Toyota Corolla Cylinder Kit, Clutch Master
Part Number: 04311-12110
$42.65 MSRP: $59.36
You Save: $16.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit Clutch; Clutch Master Cylinder
- Replaces: 04311-60150
- Part Name Code: 04311
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 2.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 04311-12110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- Base, CE, DX, LE, S, VE, XRS | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
2008 Toyota Corolla Master Cylinder
Part Number: 31420-20070
$141.34 MSRP: $200.08
You Save: $58.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Master; Clutch Master Cylinder; Brake Master Cylinder; Cylinder Assembly, Clutch Master
- Part Name Code: 31410
- Item Weight: 2.40 Pounds
- Item Dimensions: 15.8 x 11.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31420-20070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Corolla Submodels:
- CE, LE, S, XRS | 4 Cyl 1.8 L GAS

2008 Toyota Corolla Clutch Master Cylinder

Looking for affordable OEM 2008 Toyota Corolla Clutch Master Cylinder? Explore our comprehensive catalogue of genuine 2008 Toyota Corolla Clutch Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Corolla Clutch Master Cylinder Parts Q&A

Q: How to reassemble the Clutch Master Cylinder on 2008 Toyota Corolla?
A: The procedure to assemble the Clutch Master Cylinder starts with covering parts with lithium soap base glycol grease. After obtaining the piston with spring you must put them into the cylinder while avoiding any damage to the interior of the cylinder body. You should install the stop plate onto the push rod followed by adding the push rod to the cylinder body. Snap ring pliers enable installation of the snap ring when pushing the push rod. Secure the cylinder boot onto the body section then fasten the lock nut to the push rod. Install the clevis together with its lock nut onto the push rod before you install both the inlet union and a new grommet. Frame the slotted spring pin with a pin punch and hammer until it extends between 1.5 to 3.5 mm (0.059 to 0.138 in.).