How to remove the water pump on 2008 Toyota Camry?

The first task to remove the water pump from the 2AZ-FE engine involves cutting the negative battery terminal cable. First remove the right and left front wheel opening extension pads and both engine under covers from their positions. First drain engine coolant before taking off the front fender apron seal from the right side of the vehicle. The next removal steps include taking out the right side No. 2 engine mounting stay followed by the engine moving control rod sub-assembly and the right side No. 2 engine mounting bracket. Cease the V-ribbed belt while also removing the generator assembly. The water pump pulley requires Special Service Tool: 09960-10010 09962-01000 to remove its 4 securing bolts. Start by separating connections of the crankshaft position sensor clamp from the water pump assembly before unfastening wires from their clamp bracket. A mechanic should first remove the 4 bolts then the 2 nuts and finally the clamp bracket from the assembly. A screwdriver can be used to detach the water pump from the cylinder block by working between both components while taping the screwdriver tip and maintaining contact surface integrity.

OEM 2008 Toyota Camry Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Water Pumps found

View related parts
2008 Toyota Camry Water Pump
Part Number: 16100-09442
$136.76 MSRP: $193.60
You Save: $56.84 (30%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Manufacturer Note: (L)
- Replaces: 16100-39456, 16100-09440, 16100-09441, 16100-39455
- Part Name Code: 16100
- Item Weight: 4.20 Pounds
- Item Dimensions: 14.4 x 8.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-09442
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- LE, SE, XLE, XSE | 6 Cyl 3.5 L GAS
View related parts
2008 Toyota Camry Water Pump
Part Number: 16100-28041
$109.60 MSRP: $153.85
You Save: $44.25 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Water Pump Assembly; Pump Assembly, Engine Water
- Replaces: 16100-28040
- Part Name Code: 16100
- Item Weight: 2.20 Pounds
- Item Dimensions: 5.7 x 5.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-28041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
2008 Toyota Camry Water Pump
Part Number: 16100-0H010
$94.67 MSRP: $132.88
You Save: $38.21 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water; Engine Water Pump; Pump Assembly, Engine Water
- Part Name Code: 16100
- Item Weight: 3.30 Pounds
- Item Dimensions: 12.8 x 11.6 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16100-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
2008 Toyota Camry Water Pump
Part Number: G9020-33010
$351.61 MSRP: $515.29
You Save: $163.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water W/M; Pump Assembly; Pump Assembly, Water W/Motor & Bracket
- Part Name Code: 16290A
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.7 x 6.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G9020-33010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Toyota Camry Auxiliary Pump
Part Number: 87200-33010
$538.68 MSRP: $789.45
You Save: $250.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Accessory Assembly, Heat; Engine Auxiliary Water Pump; Electric Water Pump; Engine Water Pump; Pump; Pump Assembly, Water(For Heater); Water Pump
- Part Name Code: 87200A
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.0 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 87200-33010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota Camry Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)

2008 Toyota Camry Water Pump

Looking for affordable OEM 2008 Toyota Camry Water Pump? Explore our comprehensive catalogue of genuine 2008 Toyota Camry Water Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Camry Parts Questions & Experts Answers

Q: How to remove the water pump on 2008 Toyota Camry?
A: The first task to remove the water pump from the 2AZ-FE engine involves cutting the negative battery terminal cable. First remove the right and left front wheel opening extension pads and both engine under covers from their positions. First drain engine coolant before taking off the front fender apron seal from the right side of the vehicle. The next removal steps include taking out the right side No. 2 engine mounting stay followed by the engine moving control rod sub-assembly and the right side No. 2 engine mounting bracket. Cease the V-ribbed belt while also removing the generator assembly. The water pump pulley requires Special Service Tool: 09960-10010 09962-01000 to remove its 4 securing bolts. Start by separating connections of the crankshaft position sensor clamp from the water pump assembly before unfastening wires from their clamp bracket. A mechanic should first remove the 4 bolts then the 2 nuts and finally the clamp bracket from the assembly. A screwdriver can be used to detach the water pump from the cylinder block by working between both components while taping the screwdriver tip and maintaining contact surface integrity.