OEM 2008 Toyota Avalon Cruise Control Module

2008 Toyota Avalon Parts Questions & Experts Answers

• Q: How to install the Cruise Control Module Assembly and perform the necessary initialization steps on 2008 Toyota Avalon?

  A: Begin Distance Control ECU Assembly installation by fixing the bolt at 5.0 Nm (51 kgf-cm, 44 in-lbf) torque and then attach the connector. Start by installing the Instrument Panel Air Bag Assembly Lower No. 1 and then connect the cable to the negative battery terminal before a system initialization if needed since disconnecting the cable can require it. Users must inspect the SRS warning light while initializing the Distance Control ECU Assembly through this procedure: Turn on the ignition switch (IG) then activate the cruise main switch while keeping the brake pedal depressed and pressing the cruise control main switch to RES/ACC three times within three seconds followed by verifying a buzzer sound. The optical axis should not be adjusted by operating the headlight dimmer switch while performing this process. In case a mistake with the switch occurs, reset the optical axis.