OEM 2009 Toyota Avalon Cruise Control Module

2009 Toyota Avalon Cruise Control Module Parts Q&A

• Q: How to install the Cruise Control Module Assembly and perform the necessary initialization on 2009 Toyota Avalon?

  A: Begin Distance Control ECU Assembly installation by using torque of 5.0 Nm (51 kgf-cm, 44 in-lbf) to secure the bolt before connector attachment. After installing the Instrument Panel Air Bag Assembly Lower No. 1, follow with connecting the cable to the negative battery terminal. Initializing the system remains essential because different systems need this procedure when working with the negative battery cable. Check the SRS warning light while you initialize the Distance Control ECU Assembly post-replacement because this procedure ensures correct recognition of vehicle specifications. Starting the system requires switching on the IG then turning on both cruise main switches while keeping the brake pedal pressed before hitting RES/ACC three times during three seconds and verifying that the buzzer sounds. Do not use the headlight dimmer switch when performing this task because it could result in improper optical axis calibration. A wrong headlight dimmer switch activation requires a subsequent optical axis adjustment. Vehicle cancellation of beam axis adjustment mode occurs when turning off cruise control main switch operation or ignition switch off or when reaching 10 km/h of speed or higher.