How to remove the Steering Angle Sensor on 2008 Toyota 4Runner?

The first step to remove the Steering Angle Sensor includes disconnecting the negative battery cable followed by proper alignment of the front wheels facing straight ahead. The first task is to remove Steering Wheel Cover Lower No. 3 then move on to Steering Wheel Cover Lower No. 2. The following step involves removing the Steering Pad Assembly but before that you must remove the Steering Wheel Assembly. Move on to remove the Steering Column Cover Lower and the Steering Column Cover Upper. Take away both the Spiral Cable Sub-Assembly and the Turn Signal Switch Assembly. The final step requires disconnecting the steering angle sensor connector then using two claws to detach it and pulling out the Steering Angle Sensor.

OEM 2008 Toyota 4Runner Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2008 Toyota 4Runner Angle Sensor
Part Number: 89245-35020
$403.03 MSRP: $590.64
You Save: $187.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Manufacturer Note: P/N LABEL=8924535020
- Part Name Code: 89245B
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89245-35020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Toyota 4Runner Submodels:
- Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2008 Toyota 4Runner Steering Angle Sensor

Looking for affordable OEM 2008 Toyota 4Runner Steering Angle Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota 4Runner Steering Angle Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota 4Runner Steering Angle Sensor Parts Q&A

Q: How to remove the Steering Angle Sensor on 2008 Toyota 4Runner?
A: The first step to remove the Steering Angle Sensor includes disconnecting the negative battery cable followed by proper alignment of the front wheels facing straight ahead. The first task is to remove Steering Wheel Cover Lower No. 3 then move on to Steering Wheel Cover Lower No. 2. The following step involves removing the Steering Pad Assembly but before that you must remove the Steering Wheel Assembly. Move on to remove the Steering Column Cover Lower and the Steering Column Cover Upper. Take away both the Spiral Cable Sub-Assembly and the Turn Signal Switch Assembly. The final step requires disconnecting the steering angle sensor connector then using two claws to detach it and pulling out the Steering Angle Sensor.