OEM 2008 Scion xB Fan Motor

2008 Scion xB Parts Questions & Experts Answers

• Q: How to install the cooling fan motor and associated components on 2008 Scion xB?

  A: Start installation by fastening the fan with three bolts before installing the wire harness clamp. Place the No. 2 fan with 3 bolts and connect it with the wire harness clamp. Begin with installing the cooling fan motor through its nut then attach the No. 2 cooling fan motor through its nut. Put the fan shroud into place followed by attachment of outlet radiator hose and inlet radiator hose and finishing with lower radiator support. You should install the radiator assembly along with the condenser while making required adjustments to the air conditioning tube and accessory assembly. The technician should install the discharge hose sub-assembly followed by connecting the No. 1 water by-pass hose. The next step involves mounting the No. 2 fan shroud after which the radiator support cushion follows before attaching outlet and inlet radiator hoses. First install the hood lock support sub-assembly together with the hood lock control cable assembly before installing the No. 1 water hose clamp bracket. The last steps involve installing the front bumper cover together with the radiator grille and No. 1 radiator grille garnish along with the battery. The process involves the addition of engine coolant followed by charging the refrigerant and engine heating until completion of the coolant and refrigerant leak check. The installation process ends by placing the hood and checking its condition before finishing any needed modifications.