How to install the thermostat on 2008 Scion xB?

Start by placing a new gasket onto the thermostat and orient the jiggle valve upward so you can adjust it between 10 degrees in either direction from its defined position while performing the installation of the 2AZ-FE cooling system thermostat. Fasten the inlet water by applying 2 nuts then tighten them to reach 9.0 Nm (92 kgf-cm, 80 in-lbf) of torque strength. The outlet radiator hose installation should follow for the next step before adding engine coolant while checking for any leakages. The installation of No. 1 engine under cover completes the final process.

OEM 2008 Scion xB Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2008 Scion xB Thermostat
Part Number: 90916-03136
$26.28 MSRP: $36.57
You Save: $10.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Replaces: 90916-C3001
- Part Name Code: 16331A
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 0.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90916-03136
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion xB Submodels:
- Base | 4 Cyl 2.4 L GAS

2008 Scion xB Thermostat

Looking for affordable OEM 2008 Scion xB Thermostat? Explore our comprehensive catalogue of genuine 2008 Scion xB Thermostat. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion xB Parts Questions & Experts Answers

Q: How to install the thermostat on 2008 Scion xB?
A: Start by placing a new gasket onto the thermostat and orient the jiggle valve upward so you can adjust it between 10 degrees in either direction from its defined position while performing the installation of the 2AZ-FE cooling system thermostat. Fasten the inlet water by applying 2 nuts then tighten them to reach 9.0 Nm (92 kgf-cm, 80 in-lbf) of torque strength. The outlet radiator hose installation should follow for the next step before adding engine coolant while checking for any leakages. The installation of No. 1 engine under cover completes the final process.

Related 2008 Scion xB Parts

Alternate Year Models

2009 Scion xB Thermostat