How to install the rear upper control arm assembly on 2008 Scion tC?

You start rear upper control arm assembly installation by putting the camber adjust cam onto the front side of the vehicle then safely attach it with the nut plus No. 2 camber adjust cam. Install the upper control arm after which you must screw down the bolt and nut in place temporarily. The final step asks to install the rear wheel with a torque value of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Bolt and nut tightening for the rear upper control arm assembly should be performed after suspension stabilization using a torque of 74 Nm (755 kgf-cm, 55 ft-lbf) while maintaining contact with the nut. After matching the bolt nut marks we need to tighten the nut to 74 Nm (755 kgf-cm, 55 ft-lbf) torque. The inspection for and adjustments of rear wheel alignment should be the last procedure in this list.

OEM 2008 Scion tC Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
2008 Scion tC Track Bar, Driver Side
Part Number: 48730-21110
$152.26 MSRP: $215.53
You Save: $63.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Lower Control; Suspension Track Bar, Rear Left; Trailing Arm; Arm Assembly, Lower Control, Driver Side
- Position: Driver Side
- Part Name Code: 48730
- Item Weight: 3.10 Pounds
- Item Dimensions: 18.9 x 6.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48730-21110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2008 Scion tC Lower Control Arm, Driver Side
Part Number: 48069-21020
$178.85 MSRP: $255.36
You Save: $76.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Left; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Driver Side; Control Arm
- Position: Lower Driver Side
- Part Name Code: 48069
- Item Weight: 1.70 Pounds
- Item Dimensions: 20.9 x 4.0 x 19.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48069-21020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2008 Scion tC Lower Control Arm, Passenger Side
Part Number: 48068-21020
$204.80 MSRP: $292.40
You Save: $87.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Sub-Assembly, Suspension; Suspension Control Arm, Front Right; Control Arm Assembly; Arm Sub-Assembly, Front Suspension, Lower Passenger Side; Control Arm
- Position: Passenger Side
- Part Name Code: 48068
- Item Weight: 1.70 Pounds
- Item Dimensions: 20.3 x 4.0 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48068-21020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2008 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2008 Scion tC Control Arm

Looking for affordable OEM 2008 Scion tC Control Arm? Explore our comprehensive catalogue of genuine 2008 Scion tC Control Arm. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Scion tC Parts Questions & Experts Answers

Q: How to install the rear upper control arm assembly on 2008 Scion tC?
A: You start rear upper control arm assembly installation by putting the camber adjust cam onto the front side of the vehicle then safely attach it with the nut plus No. 2 camber adjust cam. Install the upper control arm after which you must screw down the bolt and nut in place temporarily. The final step asks to install the rear wheel with a torque value of 103 Nm (1,050 kgf-cm, 76 ft-lbf). Bolt and nut tightening for the rear upper control arm assembly should be performed after suspension stabilization using a torque of 74 Nm (755 kgf-cm, 55 ft-lbf) while maintaining contact with the nut. After matching the bolt nut marks we need to tighten the nut to 74 Nm (755 kgf-cm, 55 ft-lbf) torque. The inspection for and adjustments of rear wheel alignment should be the last procedure in this list.