How to service the Front Air Bag Sensor for the Sedan on 2007 Toyota Yaris?

Service of the Front Air Bag Sensor for Sedan model begins with removing the cable from the negative terminal of the battery. The service of the Front Air Bag Sensor for Sedanrequires removing the front spoiler cover with front spoiler as well as the front bumper cover followed by taking out the 2 bolts and disengaging the 2 claws to disconnect the Air Bag connector while preserving the wire harness. Follow the instructions to release the lock without holding the upper side of the CPA after which detach the connector by pushing the housing into the provisionally locked state. Check that the CPA extends past the back of the housing after completing detachment. The installation process requires shutting off the ignition system and disconnecting the battery negative term along with 90 seconds of downtime before starting the operation. Install the Air Bag connector by doing both steps of provisinal meter lock and click then connector engagement. The connector requires straight insertion as the operator keeps hold of the CPA. Check that tight contact exists between both the rear housing surface and the CPA rear section. Install the front Air Bag sensor using the provided 2 bolts which require a torque of 9.0 N.m (90 kgf.cm, 80 in.lbf) followed by a sensor loosening check through sensor movement. Reattach the front bumper cover together with the front spoiler cover before connecting the negative battery cable at 5.4 N.m (55 kgf.cm, 48 in.lbf). The last step involves examining the SRS warning light.

OEM 2007 Toyota Yaris Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2007 Toyota Yaris Front Impact Sensor
Part Number: 89173-09270
$97.75 MSRP: $117.85
You Save: $20.10 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side; Sensor, Air Bag, Front Driver Side
- Position: Front
- Replaces: 89173-09280
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-09270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2007 Toyota Yaris Side Impact Sensor, Front
Part Number: 89831-0H010
$87.75 MSRP: $105.80
You Save: $18.05 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2007 Toyota Yaris Rear Sensor
Part Number: 89831-04020
$94.08 MSRP: $113.43
You Save: $19.35 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2007 Toyota Yaris Side Impact Sensor, Rear
Part Number: 89831-0W040
$128.18 MSRP: $155.86
You Save: $27.68 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor, Air Bag, Rear Passenger Side; Sensor, Air Bag, Rear Driver Side
- Manufacturer Note: SRS AIR BAG-D(DUAL) & P(ADVANCED) & SIDE & CURTAIN
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89831-0W040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS
View related parts
2007 Toyota Yaris Position Sensor, Driver Side
Part Number: 89178-33040
$80.49 MSRP: $112.98
You Save: $32.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Seat Position; Seat Track Position Sensor, Left; Sensor, Seat Position Air Bag
- Position: Driver Side
- Part Name Code: 89178A
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.5 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89178-33040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota Yaris Submodels:
- Base, S | 4 Cyl 1.5 L GAS

2007 Toyota Yaris Air Bag Sensor

Looking for affordable OEM 2007 Toyota Yaris Air Bag Sensor? Explore our comprehensive catalogue of genuine 2007 Toyota Yaris Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota Yaris Parts Questions & Experts Answers

Q: How to service the Front Air Bag Sensor for the Sedan on 2007 Toyota Yaris?
A: Service of the Front Air Bag Sensor for Sedan model begins with removing the cable from the negative terminal of the battery. The service of the Front Air Bag Sensor for Sedanrequires removing the front spoiler cover with front spoiler as well as the front bumper cover followed by taking out the 2 bolts and disengaging the 2 claws to disconnect the Air Bag connector while preserving the wire harness. Follow the instructions to release the lock without holding the upper side of the CPA after which detach the connector by pushing the housing into the provisionally locked state. Check that the CPA extends past the back of the housing after completing detachment. The installation process requires shutting off the ignition system and disconnecting the battery negative term along with 90 seconds of downtime before starting the operation. Install the Air Bag connector by doing both steps of provisinal meter lock and click then connector engagement. The connector requires straight insertion as the operator keeps hold of the CPA. Check that tight contact exists between both the rear housing surface and the CPA rear section. Install the front Air Bag sensor using the provided 2 bolts which require a torque of 9.0 N.m (90 kgf.cm, 80 in.lbf) followed by a sensor loosening check through sensor movement. Reattach the front bumper cover together with the front spoiler cover before connecting the negative battery cable at 5.4 N.m (55 kgf.cm, 48 in.lbf). The last step involves examining the SRS warning light.